Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
1-6
SECTION 1
SYSTEM OVERVIEW
1.3 PFD SOFTKEYS
Softkey OFF
Softkey ON
OBS
TMR/REF
NRST
INSET
IDENT
XPDR
CDI
PFD
ALERTS
Figure 1-3 PFD Top Level Softkeys
INSET – Select to display the Inset Map in the lower
left corner of the PFD.
OFF – Select to remove the Inset Map.
DCLTR (3) – Select momentarily to select the desired
amount of map detail. The declutter level appears
adjacent to the DCLTR Softkey.
• No declutter: All map features are visible
• Declutter – 1: Removes land data
• Declutter – 2: Removes land and SUA data
• Declutter – 3: Removes everything except the active
flight plan
TRAFFIC – Select to display traffic on the inset
map.
TOPO – Select to display topographical data (i.e.,
coastlines, terrain, rivers, lakes) and elevation
scale on the Inset Map.
INSET
OFF
TOPO
TRAFFIC
TERRAIN
DCLTR
DCLTR-2
DCLTR-3
DCLTR-1
NEXRAD
Press the BACK or OFF Softkey
to return to the top level
softkeys.
XM LTNG
STRMSCP
BACK
ALERTS
(optional
350 only)
(optional)
(optional)
Figure 1-4 PFD Softkey Flow Chart – 1
TERRAIN – Select to display terrain information on
the Inset Map.
STRMSCP (optional) – Select to display the
Stormscope lightning data on the Inset Map
(within a 200 nm radius of the aircraft).
NEXRAD (optional) – Select to display NEXRAD
precipitation data on the Inset Map.
XM LTNG (optional) – Select to display the XM
Radio lightning data on the Inset Map.
BACK – Select to return to the previous level softkey
configuration.
ALERTS – Select to display the Alerts Window.