Pilot's Guide

5-69
GPS NAVIGATION
190-00595-00 Rev. A
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
Adding a waypoint to a stored flight plan:
1) From the Flight Plan Catalog Window, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Press the EDIT Softkey.
4) To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5) Enter the identifier, facility, or city of the new waypoint.
6) Press the ENT Key. The new waypoint now exists in the flight plan.
OR:
1) From the Flight Plan Catalog Window, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Press the ENT Key.
4) To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5) Enter the identifier, facility, or city of the new waypoint.
6) Press the ENT Key. The new waypoint now exists in the flight plan.
Removing individual waypoints from the flight plan, except waypoints in the final approach
segment:
1) From the Active Flight Plan Window, select the waypoint that is to be deleted.
2) Press the CLR Key. A confirmation window is displayed listing the waypoint.
3) With ‘OK’ highlighted, press the ENT Key. To cancel the removal request, highlight ‘CANCEL’ and press the ENT
Key.
Figure 5-53 Confirmation Window
Changing the flight plan title:
1) Press the FMS Knob from the Active Flight Plan Page.
2) Highlight the Flight Plan Title Field.
3) Turn the FMS Knobs to change/edit the title (Figure 54).