Pilot's Guide

5-34
GPS NAVIGATION
190-00595-00 Rev. A
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
5.5 DIRECT-TO-NAVIGATION (PFD)
NOTE: Section 5.3 describes the PFD Inset Map and PFD Windows. It is recommended that the user read this
section before beginning GPS navigation operations on the PFD.
Figure 5-28 PFD Direct-to Window
Waypoint Symbol
Facility Name
Identifier
City, State
Flight Plan
Waypoint List
Nearest Airport
List
Distance to Waypoint
Course to
Selected Waypoint
Bearing From
Waypoint
Waypoint
Position
OPERATIONS
A direct-to waypoint can be selected in the following ways:
• By identifier, waypoint location or facility name
• From a list of waypoints in the active flight plan
• From a list of 25 nearest airports
The PFD Direct-to window is enabled and disabled by pressing the Direct-to Key
( ) . The currently
selected waypoint displays the information shown in Figure 5-28.
Direct-to Navigation from the PFD
1) Press the Direct-to Key ( ) .
2) Turn the large FMS Knob to place the cursor in the desired selection field.
3) Turn the small FMS Knob to begin selecting the desired identifier, location, etc.
4) Press the ENT Key.
5) The cursor is now flashing on ‘ACTIVATE?’. If no altitude constraint or course is desired, press the ENT Key to
activate.