Pilot's Guide

Figure 9-13 Categories List
To select a category:
1. Press the CATGRY softkey key on the XM Radio
Page.
2. Turn the
small FMS knob to display the ‘Cat-
egories’ list (Figure 9-13). Highlight the desired
category with the small FMS knob and press
the ENT key. Selecting ‘All Categories’ places
the channels from ‘All Categories’ in the Chan-
nels field (press the CAT + and CAT - softkeys
to cycle through the categories).
Volume
The Volume ‘control’ (Figure 9-14) sets the audio vol
-
ume level, as well as mutes the audio. Pressing the VOL
softkey brings up the Volume bar graph, muting softkey,
and the Volume control softkeys.
Figure 9-14 Volume Control
To adjust the volume:
1. With the XM Radio Page displayed, press the
VOL softkey.
2. Press the VOL – softkey to reduce volume or
press the VOL + softkey to increase volume.
(once the VOL softkey is pressed, the volume
can also be adjusted using the small FMS
knob). Pressing the MUTE softkey toggles the
muting of the radio audio volume.
Presets
Up to 15 channels from any category can be assigned
a preset number. The preset channel can then be selected
directly and added to the Active Channel list for listening.
To set a preset channel number:
1. On the Radio Page while listening to the Active
Channel that you want to assign as a preset,
press PRESETS.
2. Press the
SET softkey.
3. Press the preset key (
PS1 - PS15) to assign
to the active channel.
Press the MORE softkey if
necessary.
To select a preset channel number:
1. While on the Radio page, press the
PRESETS
softkey.
2. Press the numbered softkeys (PS1 - PS15) on
the bottom of the screen to directly select the
desired preset channel. Press
MORE, if neces-
sary.
Figure 9-15 Direct Channel Selection
Opt Equipment_00617-00_0A.indd 23 7/12/2005 8:22:14 AM