Pilot's Guide
Garmin G1000 Pilot’s Guide for the Tiger AG-5B 190-00617-00 Rev. A
9-6
STORMSCOPE
Stormscope Page Operations
The following Stormscope Page operations are avail
-
able using softkeys or page menu options:
• Changing the display range
• Changing the lightning mode between cell and
strike
• Changing the viewing mode between 360° and
120° ARC
• Clearing Stormscope lightning data
To change the display range:
To change the display range on the Stormscope Page,
turn the joystick clockwise to zoom out or turn the
joystick counter-clockwise to zoom in. Display ranges
are 25 nm, (25 and 50) nm, (50 and 100) nm, and (100
and 200) nm.
To change the Stormscope lightning mode
between ‘cell’ and ‘strike’:
1. Select the Stormscope Page.
2. Press the
MODE
softkey. The
CELL
and
STRIKE
softkeys are displayed. Press the
CELL
softkey
to display ‘CELL’ data or press the
STRIKE
softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box located in
the upper left corner of the Stormscope Page
OR:
3. Press the
MENU
key. The page menu is
displayed with ‘Strike Mode’ or ‘Cell Mode’
highlighted. Press the
ENT
key on the desired
selection.
To change the viewing mode between
360
˚
and 120˚:
1. Select the Stormscope Page.
2. Press the
VIEW
softkey. The
360
and
ARC
softkeys are displayed. Press the 360 softkey
to display a 360˚ viewing area or press the ARC
softkey to display a 120˚ viewing area
OR:
3. Press the
MENU
key. The page menu is
displayed. Turn the FMS knob to select the
desired view. Press the
ENT
key on the desired
selection.
To clear Stormscope lightning data from
the display:
1. Press the
CLEAR
softkey to remove all
Stormscope lightning data from the display
OR: Press the
MENU
key. Select ‘Clear Lightning
Data’ and press the
ENT
key.
Opt Equipment_00617-00_0A.indd 6 7/12/2005 8:21:28 AM