Pilot's Guide

Garmin G1000 Pilot’s Guide for the Tiger AG-5B190-00617-00 Rev. A
7-3
INTRODUCTION
SELECTING A PROCEDURE GROUP
Depending on the specific airframe, there are a certain
number of groups of procedures with their respective
checklists available to the pilot.
To select a procedure group:
1. Press the
CHKLIST softkey.
2. Turn the
large FMS knob to select the ‘GROUP’
field.
3. Turn the
small FMS knob to select the desired
procedure and press the ENT key.
SELECTING A CHECKLIST WITHIN THE
PROCEDURE GROUP
1. Turn the large FMS knob to select the ‘Checklist’
field.
2. Turn the
large or small FMS knob to select the
desired checklist and press the ENT key.
SELECTING A CHECKLIST ITEM
Two methods are available to select a checklist item: (1)
pressing the
ENT key; or (2) pressing the DONE softkey.
(1) Pressing the ENT key:
With the desired checklist displayed, turn the large
or small FMS knob to move up and down the checklist
and highlight an item with a hollow white rectangle. The
default color for non-selected checklist items is blue and
once the item is highlighted, the color turns white. To
select a checklist item that is highlighted, press the ENT
key. The selected item turns green in color again for ease
of identification, and then a check mark is placed in the
box next to the item. As an item is selected, the next item
is automatically highlighted for selection.
(2) Pressing the DONE Softkey: Pressing the DONE
softkey produces the same results as pressing the ENT
key.
NOTE: All warnings are displayed in yellow for
ease of identification.
REMOVING THE CHECK MARK FROM A
CHECKLIST ITEM
Press the CLR key to remove a check mark from an
item.
ADVANCING TO THE NEXT CHECKLIST
Once the last item in a checklist is selected, the ‘GO
TO THE NEXT CHECKLIST?’ text is highlighted. Press
the ENT key to advance to the next checklist displayed.
ONE-BUTTON ACCESS TO EMERGENCY
PROCEDURES
The EMERGENCY softkey is available at all times when
the checklist page is displayed. Press the EMERGENCY
softkey at any time to immediately access the emergency
procedures.
EXITING THE CHECKLIST PAGE
The EXIT softkey is available as long as the Checklist
Page is displayed. Press the EXIT softkey or momentarily
hold down the
CLR key at anytime to exit the Checklist
Page and return to the last page that was displayed before
the Checklist Page was selected.
MFD_00617-00_0A.indd 3 7/12/2005 8:02:48 AM