Cockpit Reference Guide
Table Of Contents
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- Index
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
- 12.4 G1000 System Message Advisories
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347 Message Advisories
- GIA 63 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GDC 74A Message Advisories
- Miscellaneous Message Advisories
- Miscellaneous Message Advisories (Cont.)

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B
10-3
SECTION 10 – HAZARD
AVOIDANCE
2. Press the
VIEW
softkey. The
360
and
ARC
soft-
keys are displayed. Press the 360 softkey to
display a 360˚ viewing are or press the ARC
softkey to display a 120˚ viewing area.
Press the
CLEAR
softkey to remove all Storm-
scope lightning data from the display.
10.3 XM WEATHER (OPTIONAL)
WARNING: Use of XM weather for hazard-
ous weather penetration is not recommended.
Weather information provided by XM Radio
Service is approved only for weather avoidance,
not penetration.
1. Press the
MAP
softkey.
2. Press the
NEXRAD or XM LTNG
softkey to dis-
play the desired weather. Press the applicable
softkey again to remove weather data from the
Navigation Map Page.
Figure 10-7 Navigation Map Page Displaying NEXRAD Weather
Displaying METAR and TAF information on the
Airport Information Page
To display METAR and TAF text on the Air-
port Information Page:
1. Turn the
large FMS
knob to select the WPT Page
Group.
2. Turn the
small FMS
knob to select the Airport
Information Page.
3. Press the WX softkey to display METAR and TAF
text (METAR and TAF information is updated
every 12 minutes).
Figure 10-8 METAR and TAF Text Displayed on the
Airport (Weather) Information Page
METAR
Text
TAF
Text
WX
Softkey










