Cockpit Reference Guide

ManualsBrandsGarmin ManualsFlight DecksGarmin Software Version 0464.00

Table Of Contents

SECTION 1: System Overview
- 1.1 PFD/MFD Controls
- 1.2 PFD Softkeys
- 1.3 MFD Softkeys
- 1.4 MFD Page Groups
- 1.5 Backlighting
Section 2: FLIGHT INSTRUMENTS
- 2.1 Airspeed Indicator
- 2.2 Attitude Indicator
- 2.3 Altimeter
- 2.4 Vertical Deviation/Glideslope Indicator
- 2.5 Marker Beacon Annunciations
- 2.6 Vertical Speed Indicator
- 2.7 Horizontal Situation Indicator (HSI)
section 3: engine indication system (EIS)
- 3.1 Engine Display
- 3.2 Lean Engine Display
  - Cylinder Select
- 3.3 Engine System Display
Section 4: NAV/COM and Transponder
- 4.1 Radio Status Indications
- 4.2 Volume
- 4.3 Automatic Squelch
- 4.4 Quickly Activating 121.500 MHz
- 4.5 Frequency Auto-tuning
  - Auto-tuning on the PFD
  - Auto-tuning on the MFD
- 4.6 Transponder
  - Mode Selection
  - Flight ID Reporting
SECTION 5: Audio Panel
- 5.1 COM Radio Selection
- 5.2 Marker Beacon Receiver
  - Marker Beacon Signal Sensitivity
- 5.3 Nav Radio Audio Selection
- 5.4 Intercom System (ICS) Isolation
- 5.5 Intercom Squelch Control
- 5.6 Digital Clearance Recorder with Playback Capability
Section 6: aUTOMATIC fLIGHT cONTROL
Section 7: Navigation
- 7.1 Navigation Map Page
  - Select the MAP Page Group
- 7.2 Direct-to Navigation
  - Direct-to Navigation from the MFD
  - Direct-to Navigation from the PFD
- 7.3 Airport Information
- 7.4 Intersection Information
  - Select the Intersection Information Page
  - Access Information on an Intersection
- 7.5 NDB Information
  - Select the NDB Information Page
  - View Information on a Specific NDB:
- 7.6 VOR Information
  - Select the VOR Information Page
  - Access Information on a VOR:
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
  - Nearest Airport Information on the MFD
  - Nearest Airports Information on the PFD
- 7.9 Nearest Intersections
  - Select the Nearest Intersections Page
  - View Information on the Nearest Intersection
- 7.10 Nearest NDB
  - Select the Nearest NDB Page
  - Access Information on a Specific NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
  - Select the Nearest User Waypoint Page
  - Select a Nearest User Waypoint
- 7.13 Nearest Frequencies
  - Select the Nearest Frequencies Page
  - Select and Load the Nearest ARTCC, FSS, or Weather Frequency
- 7.14 Nearest Airspaces
sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
  - Create a new flight plan using the PFD
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
Section 9: Procedures
- 9.1 Arrivals and Departures
  - Load and Activate a Departure Procedure
  - Load and Activate An Arrival Procedure
- 9.2 Approaches
  - Load and/or Activate an Approach Procedure
  - Activate An Approach in the Active Flight Plan
Section 10: Hazard Avoidance
- 10.1 Customizing the Hazard Displays on the Navigation Map
- 10.2 STORMSCOPE® (Optional)
  - Displaying Stormscope Lightning Data on the Navigation Map Page
  - Stormscope Page
- 10.3 XM Weather (Optional)
- 10.4 Traffic Information Service (TIS)
- 10.5 Terrain And Obstacle Proximity
  - Displaying Terrain and Obstacles on the Terrain Proximity Page
  - Displaying Terrain and Obstacles on the Navigation Map
Section 11: Abnormal Operation
- 11.1 Reversionary Mode
- 11.2 Abnormal COM Operation
- 11.3 Unusual Attitudes
- 11.4 Stormscope operation with loss of Heading Input
Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
  - Voice Alerts
- 12.4 G1000 System Message Advisories
Index
SECTION 1: System Overview
- 1.1 PFD/MFD Controls
- 1.2 PFD Softkeys
- 1.3 MFD Softkeys
- 1.4 MFD Page Groups
- 1.5 Backlighting
Section 2: FLIGHT INSTRUMENTS
- 2.1 Airspeed Indicator
- 2.2 Attitude Indicator
- 2.3 Altimeter
- 2.4 Vertical Deviation/Glideslope Indicator
- 2.5 Marker Beacon Annunciations
- 2.6 Vertical Speed Indicator
- 2.7 Horizontal Situation Indicator (HSI)
section 3: engine indication system (EIS)
- 3.1 Engine Display
- 3.2 Lean Engine Display
  - Cylinder Select
- 3.3 Engine System Display
Section 4: NAV/COM and Transponder
- 4.1 Radio Status Indications
- 4.2 Volume
- 4.3 Automatic Squelch
- 4.4 Quickly Activating 121.500 MHz
- 4.5 Frequency Auto-tuning
  - Auto-tuning on the PFD
  - Auto-tuning on the MFD
- 4.6 Transponder
  - Mode Selection
  - Flight ID Reporting
SECTION 5: Audio Panel
- 5.1 COM Radio Selection
- 5.2 Marker Beacon Receiver
  - Marker Beacon Signal Sensitivity
- 5.3 Nav Radio Audio Selection
- 5.4 Intercom System (ICS) Isolation
- 5.5 Intercom Squelch Control
- 5.6 Digital Clearance Recorder with Playback Capability
Section 6: aUTOMATIC fLIGHT cONTROL
Section 7: Navigation
- 7.1 Navigation Map Page
  - Select the MAP Page Group
- 7.2 Direct-to Navigation
  - Direct-to Navigation from the MFD
  - Direct-to Navigation from the PFD
- 7.3 Airport Information
- 7.4 Intersection Information
  - Select the Intersection Information Page
  - Access Information on an Intersection
- 7.5 NDB Information
  - Select the NDB Information Page
  - View Information on a Specific NDB:
- 7.6 VOR Information
  - Select the VOR Information Page
  - Access Information on a VOR:
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
  - Nearest Airport Information on the MFD
  - Nearest Airports Information on the PFD
- 7.9 Nearest Intersections
  - Select the Nearest Intersections Page
  - View Information on the Nearest Intersection
- 7.10 Nearest NDB
  - Select the Nearest NDB Page
  - Access Information on a Specific NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
  - Select the Nearest User Waypoint Page
  - Select a Nearest User Waypoint
- 7.13 Nearest Frequencies
  - Select the Nearest Frequencies Page
  - Select and Load the Nearest ARTCC, FSS, or Weather Frequency
- 7.14 Nearest Airspaces
sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
  - Create a new flight plan using the PFD
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
Section 9: Procedures
- 9.1 Arrivals and Departures
  - Load and Activate a Departure Procedure
  - Load and Activate An Arrival Procedure
- 9.2 Approaches
  - Load and/or Activate an Approach Procedure
  - Activate An Approach in the Active Flight Plan
Section 10: Hazard Avoidance
- 10.1 Customizing the Hazard Displays on the Navigation Map
- 10.2 STORMSCOPE® (Optional)
  - Displaying Stormscope Lightning Data on the Navigation Map Page
  - Stormscope Page
- 10.3 XM Weather (Optional)
- 10.4 Traffic Information Service (TIS)
- 10.5 Terrain And Obstacle Proximity
Section 11: Abnormal Operation
- 11.1 Reversionary Mode
- 11.2 Abnormal COM Operation
- 11.3 Unusual Attitudes
- 11.4 Stormscope operation with loss of Heading Input
Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
  - Voice Alerts
- 12.4 G1000 System Message Advisories

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B

SECTION 7 – NAVIGATION

7-2

4. Continue turning the

small FMS

knob to scroll

through the list and highlight the desired

waypoint or airport.

5. Press the

ENT

key to conﬁrm the selection.

Press

ENT

again to activate a Direct-to.

To re-center the CDI (HSI) needle to the

same destination waypoint:

1. Press the Direct-to

( )

key, followed by

pressing the

ENT

key twice. NOTE: If a missed

approach point (MAP) is the current destina-

tion, the approach will be canceled.

To manually deﬁne the Direct-to course:

1. Press the

Direct-to

( )

key.

2. Turn the

FMS

knobs to select the destination

waypoint.

3. Press the

ENT

key to conﬁrm the selected way-

point, then turn the

large FMS

knob to highlight

the Direct-to Course ﬁeld.

4. Turn the

FMS

knobs to select the desired course

and press the

ENT

key.

5. Press the

ENT

key again to begin navigation

using the selected destination and course.

Canceling Direct-to Navigation:

1. Press the

Direct-to

( )

key.

2. Press the

key to display the Direct-to

options menu.

3. With ‘Cancel Direct-To NAV’ highlighted, press

the

ENT

key. If a ﬂight plan is still active, the

G1000 resumes navigating the ﬂight plan

along the closest leg.

Figure 7-3 Canceling Direct-to Navigation

Direct-to Navigation from the PFD

Figure 7-4 PFD Direct-to Window

WPT Symbol

Identiﬁer

Facility Name

WPT Location

Nearest WPT

Bearing to WPT

Distance from WPT

Lat/Lon

Course to Selected WPT

Flight Plan WPT

1. Press the Direct-to key

( )

2. Turn the

large FMS

knob to place the cursor in

the desired selection ﬁeld.

3. Turn the

small FMS

knob to begin selecting the

desired identiﬁer, location, etc.

4. Press the

ENT

key.

5. The cursor is now ﬂashing on ‘ACTIVATE?’.

Press the

ENT

key again to activate.

Cancelling Direct-to Navigation:

1. Press the Direct-to

( )

key.

2. Press the

key to display the Options

Window. The cursor will be ﬂashing on ‘Cancel

Direct-to NAV’.

3. Press the

ENT

key to cancel the direct-to.