Cockpit Reference Guide
Table Of Contents
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- Index
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
- 12.4 G1000 System Message Advisories
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347 Message Advisories
- GIA 63 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GDC 74A Message Advisories
- Miscellaneous Message Advisories
- Miscellaneous Message Advisories (Cont.)

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B
SECTION 7 – NAVIGATION
7-1
SECTION 7: NAVIGATION
7.1 NAVIGATION MAP PAGE
Select the MAP Page Group
1. Turn the
large FMS
knob until
MAP
is high-
lighted in the page group window in the lower
right of the MFD display.
2. Turn the
small FMS
knob to select the first
MAP
page (indicated by a solid rectangular icon).
3. Press the
MAP
softkey to display softkeys for the
available information which may be displayed
on the map.
WARNING: The map display should only be
used for situational awareness. Any map display
indication should be compared with approved
navigation sources.
Figure 7-1 Navigation Map Page
7.2 DIRECT-TO NAVIGATION
Direct-to Navigation from the MFD
Identifier
Facility Name
City
Map of the
Selected
Waypoint
Bearing
Distance
Direct-to
Course
Region
Latitude/
Longitude
Symbol
Nearest Airport
Map Orientation
Map Range
Flight Plan Field
Activate Field
Figure 7-2 MFD Direct-to Window
To enter a Direct-to destination:
1. Press the
Direct-to
( )
key.
2. Turn the
small FMS
knob to enter the first letter
of the destination waypoint identifier. Turn the
large FMS
knob to the right to move the cursor
to the next character position.
3. Repeat step 2 to spell out the rest of the way
-
point identifier.
4. Press the
ENT
key to confirm the identifier. The
‘Activate?’ field is highlighted.
5. Press the
ENT
key to activate.
To select a Direct-to destination to a flight
plan waypoint or nearest airport:
1. Press the
Direct-to
( )
key.
2. Turn the
large FMS
knob to highlight the Flight
Plan Field or Nearest Airport Field.
3. Turn the
small FMS
knob to display a list way-
points or airports.










