Cockpit Reference Guide

ManualsBrandsGarmin ManualsFlight DecksGarmin Software Version 0464.00

Table Of Contents

SECTION 1: System Overview
- 1.1 PFD/MFD Controls
- 1.2 PFD Softkeys
- 1.3 MFD Softkeys
- 1.4 MFD Page Groups
- 1.5 Backlighting
Section 2: FLIGHT INSTRUMENTS
- 2.1 Airspeed Indicator
- 2.2 Attitude Indicator
- 2.3 Altimeter
- 2.4 Vertical Deviation/Glideslope Indicator
- 2.5 Marker Beacon Annunciations
- 2.6 Vertical Speed Indicator
- 2.7 Horizontal Situation Indicator (HSI)
section 3: engine indication system (EIS)
- 3.1 Engine Display
- 3.2 Lean Engine Display
  - Cylinder Select
- 3.3 Engine System Display
Section 4: NAV/COM and Transponder
- 4.1 Radio Status Indications
- 4.2 Volume
- 4.3 Automatic Squelch
- 4.4 Quickly Activating 121.500 MHz
- 4.5 Frequency Auto-tuning
  - Auto-tuning on the PFD
  - Auto-tuning on the MFD
- 4.6 Transponder
  - Mode Selection
  - Flight ID Reporting
SECTION 5: Audio Panel
- 5.1 COM Radio Selection
- 5.2 Marker Beacon Receiver
  - Marker Beacon Signal Sensitivity
- 5.3 Nav Radio Audio Selection
- 5.4 Intercom System (ICS) Isolation
- 5.5 Intercom Squelch Control
- 5.6 Digital Clearance Recorder with Playback Capability
Section 6: aUTOMATIC fLIGHT cONTROL
Section 7: Navigation
- 7.1 Navigation Map Page
  - Select the MAP Page Group
- 7.2 Direct-to Navigation
  - Direct-to Navigation from the MFD
  - Direct-to Navigation from the PFD
- 7.3 Airport Information
- 7.4 Intersection Information
  - Select the Intersection Information Page
  - Access Information on an Intersection
- 7.5 NDB Information
  - Select the NDB Information Page
  - View Information on a Specific NDB:
- 7.6 VOR Information
  - Select the VOR Information Page
  - Access Information on a VOR:
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
  - Nearest Airport Information on the MFD
  - Nearest Airports Information on the PFD
- 7.9 Nearest Intersections
  - Select the Nearest Intersections Page
  - View Information on the Nearest Intersection
- 7.10 Nearest NDB
  - Select the Nearest NDB Page
  - Access Information on a Specific NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
  - Select the Nearest User Waypoint Page
  - Select a Nearest User Waypoint
- 7.13 Nearest Frequencies
  - Select the Nearest Frequencies Page
  - Select and Load the Nearest ARTCC, FSS, or Weather Frequency
- 7.14 Nearest Airspaces
sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
  - Create a new flight plan using the PFD
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
Section 9: Procedures
- 9.1 Arrivals and Departures
  - Load and Activate a Departure Procedure
  - Load and Activate An Arrival Procedure
- 9.2 Approaches
  - Load and/or Activate an Approach Procedure
  - Activate An Approach in the Active Flight Plan
Section 10: Hazard Avoidance
- 10.1 Customizing the Hazard Displays on the Navigation Map
- 10.2 STORMSCOPE® (Optional)
  - Displaying Stormscope Lightning Data on the Navigation Map Page
  - Stormscope Page
- 10.3 XM Weather (Optional)
- 10.4 Traffic Information Service (TIS)
- 10.5 Terrain And Obstacle Proximity
  - Displaying Terrain and Obstacles on the Terrain Proximity Page
  - Displaying Terrain and Obstacles on the Navigation Map
Section 11: Abnormal Operation
- 11.1 Reversionary Mode
- 11.2 Abnormal COM Operation
- 11.3 Unusual Attitudes
- 11.4 Stormscope operation with loss of Heading Input
Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
  - Voice Alerts
- 12.4 G1000 System Message Advisories
Index
SECTION 1: System Overview
- 1.1 PFD/MFD Controls
- 1.2 PFD Softkeys
- 1.3 MFD Softkeys
- 1.4 MFD Page Groups
- 1.5 Backlighting
Section 2: FLIGHT INSTRUMENTS
- 2.1 Airspeed Indicator
- 2.2 Attitude Indicator
- 2.3 Altimeter
- 2.4 Vertical Deviation/Glideslope Indicator
- 2.5 Marker Beacon Annunciations
- 2.6 Vertical Speed Indicator
- 2.7 Horizontal Situation Indicator (HSI)
section 3: engine indication system (EIS)
- 3.1 Engine Display
- 3.2 Lean Engine Display
  - Cylinder Select
- 3.3 Engine System Display
Section 4: NAV/COM and Transponder
- 4.1 Radio Status Indications
- 4.2 Volume
- 4.3 Automatic Squelch
- 4.4 Quickly Activating 121.500 MHz
- 4.5 Frequency Auto-tuning
  - Auto-tuning on the PFD
  - Auto-tuning on the MFD
- 4.6 Transponder
  - Mode Selection
  - Flight ID Reporting
SECTION 5: Audio Panel
- 5.1 COM Radio Selection
- 5.2 Marker Beacon Receiver
  - Marker Beacon Signal Sensitivity
- 5.3 Nav Radio Audio Selection
- 5.4 Intercom System (ICS) Isolation
- 5.5 Intercom Squelch Control
- 5.6 Digital Clearance Recorder with Playback Capability
Section 6: aUTOMATIC fLIGHT cONTROL
Section 7: Navigation
- 7.1 Navigation Map Page
  - Select the MAP Page Group
- 7.2 Direct-to Navigation
  - Direct-to Navigation from the MFD
  - Direct-to Navigation from the PFD
- 7.3 Airport Information
- 7.4 Intersection Information
  - Select the Intersection Information Page
  - Access Information on an Intersection
- 7.5 NDB Information
  - Select the NDB Information Page
  - View Information on a Specific NDB:
- 7.6 VOR Information
  - Select the VOR Information Page
  - Access Information on a VOR:
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
  - Nearest Airport Information on the MFD
  - Nearest Airports Information on the PFD
- 7.9 Nearest Intersections
  - Select the Nearest Intersections Page
  - View Information on the Nearest Intersection
- 7.10 Nearest NDB
  - Select the Nearest NDB Page
  - Access Information on a Specific NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
  - Select the Nearest User Waypoint Page
  - Select a Nearest User Waypoint
- 7.13 Nearest Frequencies
  - Select the Nearest Frequencies Page
  - Select and Load the Nearest ARTCC, FSS, or Weather Frequency
- 7.14 Nearest Airspaces
sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
  - Create a new flight plan using the PFD
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
Section 9: Procedures
- 9.1 Arrivals and Departures
  - Load and Activate a Departure Procedure
  - Load and Activate An Arrival Procedure
- 9.2 Approaches
  - Load and/or Activate an Approach Procedure
  - Activate An Approach in the Active Flight Plan
Section 10: Hazard Avoidance
- 10.1 Customizing the Hazard Displays on the Navigation Map
- 10.2 STORMSCOPE® (Optional)
  - Displaying Stormscope Lightning Data on the Navigation Map Page
  - Stormscope Page
- 10.3 XM Weather (Optional)
- 10.4 Traffic Information Service (TIS)
- 10.5 Terrain And Obstacle Proximity
Section 11: Abnormal Operation
- 11.1 Reversionary Mode
- 11.2 Abnormal COM Operation
- 11.3 Unusual Attitudes
- 11.4 Stormscope operation with loss of Heading Input
Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
  - Voice Alerts
- 12.4 G1000 System Message Advisories

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B

2-7

SECTION 2

FLIGHT INSTRUMENTS

Navigation Source

To change between navigation sources:

1. Press the

CDI softkey to change from GPS to

VOR1/LOC1.

2. Press the

CDI softkey again to change from

VOR1/LOC1 to VOR2/LOC2.

3. Press the

CDI

softkey a third time to return to

GPS.

When using GPS as the navigation source, the follow-

ing may appear:

• INTEG – RAIM is not available

• WARN – GPS detects a position error

• SUSP – Displayed when in OBS Mode indicating

GPS navigation is suspended.

Figure 2-17 GPS INTEG, GPS SUSP, LOC1 and VOR2

To enable/disable OBS mode while navigating

with GPS:

1. Press the

OBS softkey to select OBS Mode.

2. Turn the CRS knob to select the desired course

TO/FROM the waypoint.

3. Press the OBS softkey again to return to normal

operation.