Cockpit Reference Guide
Table Of Contents
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- Index
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
- 12.4 G1000 System Message Advisories
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347 Message Advisories
- GIA 63 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GDC 74A Message Advisories
- Miscellaneous Message Advisories
- Miscellaneous Message Advisories (Cont.)

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B
2-4
SECTION 2
FLIGHT INSTRUMENTS
2.3 ALTIMETER
Altitude Reference
Box
Altitude Trend
Vector
Current Altitude
Barometric Setting
Box
Figure 2-7 Altimeter
Altitude Reference Bug
Altitude Reference Bug
The Altitude Reference Bug can be set to any desired
altitude. The bug acts as a visual reference to indicate the
desired altitude is approaching.
To set the altitude reference bug:
1. Turn the
ALT
knobs to set the altitude reference
bug. The
small ALT
knob sets the hundreds and
the
large ALT
knob sets the thousands. This
altitude also appears in the altitude reference
box above the altimeter.
Altitude Trend Vector
The end of the trend vector displays approximately
what the altitude will be in 6 seconds if the current rate of
vertical speed is maintained.
Barometric Setting Box
To set barometric pressure, turn the BARO knob to
select the desired setting.
2.4 VERTICAL DEVIATION/GLIDESLOPE
INDICATOR
The Vertical Deviation/Glideslope Indicator appears
when an ILS is tuned in the active NAV field.
2.5 MARKER BEACON ANNUNCIATIONS
Figure 2-8 Marker Beacon and Vertical Deviation
Marker Beacon
Annunciation
Vertical
Deviation/Glideslope
Indicator










