Cockpit Reference Guide
Table Of Contents
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- Index
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
- 12.4 G1000 System Message Advisories
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347 Message Advisories
- GIA 63 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GDC 74A Message Advisories
- Miscellaneous Message Advisories
- Miscellaneous Message Advisories (Cont.)

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B
1-8
SECTION 1
SYSTEM OVERVIEW
1.4 MFD PAGE GROUPS
1. Turn the
large FMS
knob until the desired page
group is selected.
2. Turn the
small FMS
knob to select pages within
the group. See Figure 1-7.
Figure 1-7 Page Group Icon
Map Page Group
Waypoint Page Group
Auxiliary Page Group
Nearest Group
Selected Page
Number of Pages in Current
Group
1.5 BACKLIGHTING
To manually adjust the backlight for the
PFD and MFD:
1. Press the
MENU key on the PFD to display the
PFD Setup Menu window.
2. Press the small FMS knob to activate the
cursor. ‘PFD DSPL > AUTO’ is now high
-
lighted.
3. Turn the small FMS knob to display the
selection window.
4. Turn the
FMS knob to select ‘MANUAL’, then
press the ENT key.
5. With the intensity value now highlighted, turn
the small FMS knob to select the desired
backlighting.
6. Turn the large FMS knob to highlight ‘MFD
DSPL > AUTO’ and repeat steps 3 through 5.
Figure 1-8 PFD Setup Menu Window










