Cockpit Reference Guide
Table Of Contents
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- Index
- SECTION 1: System Overview
- Section 2: FLIGHT INSTRUMENTS
- section 3: engine indication system (EIS)
- Section 4: NAV/COM and Transponder
- SECTION 5: Audio Panel
- Section 6: aUTOMATIC fLIGHT cONTROL
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Airport Information
- 7.4 Intersection Information
- 7.5 NDB Information
- 7.6 VOR Information
- 7.7 User Waypoint Information Page
- 7.8 Nearest Airports
- 7.9 Nearest Intersections
- 7.10 Nearest NDB
- 7.11 Nearest VOR
- 7.12 Nearest User Waypoint
- 7.13 Nearest Frequencies
- 7.14 Nearest Airspaces
- sECTION 8: fLIGHT PLANNING
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Load a Departure
- 8.9 Load an Arrival
- 8.10 Load an Approach
- 8.11 Remove a Departure, Arrival, or Approach from a Flight Plan
- 8.12 Store a Flight Plan
- 8.13 Edit a Stored Flight Plan
- 8.14 Delete a Waypoint from the Flight Plan
- 8.15 Invert and activate a Stored Flight Plan
- 8.16 Copy a Flight Plan
- 8.17 Delete a Flight Plan
- 8.18 Graphical Flight Plan Creation
- 8.19 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 Aircraft Alerts
- 12.3 G1000 System Annunciations
- 12.4 G1000 System Message Advisories
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347 Message Advisories
- GIA 63 Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GDC 74A Message Advisories
- Miscellaneous Message Advisories
- Miscellaneous Message Advisories (Cont.)

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B
1-6
SECTION 1
SYSTEM OVERVIEW
NRST
OBS
TMR/REF
IDENT
ALERTS
XPDR
STBY
ON
BACK
VFR
ALT
CODE
IDENT
0
1
6
3
2
4
5
7
IDENT
BACK
BKSP
Press the BACK softkey
to return to the top level
softkeys
Press the
BACK
softke
y
to return to
the top level
softkeys
ALERTS
ALERTS
CDI
CDI (VOR1)
CDI (VOR2)
GPS
Figure 1-5 PFD Softkey Flow Chart – 3
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References
window.
NRST – Press to display the Nearest Airports
window.
ALERTS – Press to display the Alerts window.
1.3 MFD SOFTKEYS
ENGINE – Pressing this softkey makes available
the LEAN and SYSTEM and softkeys which in
turn access the Lean Page and the System Page,
respectively.
MAP – pressing this softkey enables the following
softkeys:
TRAFFIC – pressing this softkey displays/
removes Traffic on the Navigation Map.
TOPO – pressing this softkey displays or
removes topographic information on the
Navigation Map.
TERRAIN – pressing this softkey displays/
removes terrain and obstacle data on the
Navigation Map.
STRMSCP (optional) – pressing this softkey
displays/removes Stormscope lightning
data on the Navigation Map.
NEXRAD (optional) – pressing this softkey
displays/removes precipitation data on the
Navigation Map.
XM LTNG (optional) – pressing this softkey
displays/removes XM Radio lightning data
on the Navigation Map.










