Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Tiger AG-5B
1-4
SECTION 1
SYSTEM OVERVIEW
1.2 PFD SOFTKEYS
Softkey OFF
Softkey ON
OBS
TMR/REF
NRST
INSET
IDENT
XPDR
CDI
PFD
ALERTS
Figure 1-2 PFD Top Level Softkeys
INSET – Press to display the Inset Map in the lower
left corner of the PFD.
OFF – Press to remove the Inset Map
DCLTR (3) – Press momentarily to select the
desired amount of map detail. The declutter
level appears adjacent to the DCLTR softkey.
• No declutter: All map features are visible
• Declutter – 1: Declutters land data
• Declutter – 2: Declutters land and SUA data
• Declutter – 3: Declutters large NAV data remaining
(removes everything except the active flight plan)
TRAFFIC – Press to display TIS traffic on the map.
TOPO – Press to display topographical data (i.e.,
coastlines, terrain, rivers, lakes, etc.) and
elevation scale on the inset map.
TERRAIN – Press to display terrain information
on the inset map.
STRMSCP (optional) – Press to display the Storm-
scope lightning data on the inset map (within
a 200 nm radius of the aircraft).
NEXRAD (optional) – Press to display NEXRAD
precititation data on the inset map.
XM LTNG (optional) – Press to display the XM
Radio lightning data on the inset map.
BACK – Press to return to the previous level
softkey configuration.
PFD – Press to display the additional softkeys for
additional configurations to the PFD.
METRIC – Press to display the current and refer-
ence altitudes in meters, in addition to feet.
Pressing the metric softkey also changes the
barometric setting to hectopascals.
DFLTS – Press to reset default settings on the PFD.
BRG1 (bearing) – Press to cycle through the follow-
ing Nav sources, making the pointer the indica-
tor for the corresponding source and displaying
the the appropriate information.
NAV1 – Displays NAV1 waypoint frequency or
identifier and DME information in the BRG1
information window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG1 information
window.
OFF – Removes the BRG1 information
window.
360 HSI – Press to display the 360° compass rose.
ARC HSI – Press to display the 140° viewable arc.
BRG2 (bearing) – Press to cycle through the follow-
ing Nav sources, making the pointer the indica-
tor for the corresponding source and displaying
the the appropriate information.
NAV2 – Displays NAV2 waypoint frequency or
identifier and DME information in the BRG2
information window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG2 information
window.
OFF – Removes the BRG2 information
window.
STD BARO – Press to set the barometric pressure
to 29.92 inches of mercury (1013 hPa by
pressing the
METRIC softkey).
BACK – Press to return to the previous level
softkeys.
OBS – Press to select OBS mode on the CDI when
navigating by GPS (only available with active leg).
CDI – Press to change navigation mode on the CDI
between GPS, VOR1 and VOR2.
XPDR – Press to display the transponder mode selec-
tion softkeys.
STBY – Press to select standby mode.
ON – Press to select mode A.