Pilot's Guide
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
190-00494-04 Rev. A
62
FLIGHT INSTRUMENTS
ABaroTransitionAlertisprovidedtoalertthepilottochangethebarometricpressuresettingwhencrossing
the transition altitude (in either direction). This is displayed by the barometric pressure setting flashing light
blue when crossing the transition altitude.
Setting the Baro Transition Alert:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight ON or OFF in the Baro Transition Alert box.
4) Turn the small FMS Knob to turn the alert OFF or ON and press the ENT Key.
5) With the altitude field highlighted, turn the small FMS Knob to set desired altitude and press the ENT Key.
6) To cancel the selection, press the FMS Knob.
Figure 2-15 Baro Transition Alert
(AUX - System Setup Page)