Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-03 Rev. A
Appendix
104
Flight
InstrumentsEICAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
4) Apply power to the system, check that the databases are initialized
and displayed on the power-up screen. When updating the terrain and
FliteCharts databases, a ‘Verifying’ message may be seen. If this message is
present, wait for the system to finish loading before proceeding to step 5.
Database Information on the Power-up Screen
5) Acknowledge the Power-up Page agreement by pressing the ENT Key or
the right most softkey.
6) Turn the large FMS Knob to select the AUX Page group on the MFD.
7) Turn the small FMS Knob to select the System Status Page.
8) Make sure the SYNC DBS Softkey is in the enabled state.
9) Monitor the Sync Status in the Database Window. Wait for all databases to
complete synching, indicated by ‘Complete’ being displayed.
10) Remove and reapply power to the system.
11) Turn the large FMS Knob to select the AUX Page group on the MFD.
12) Turn the small FMS Knob to select the System Status Page.
13) Select the Display Database Selection Softkey to show database information
for each display (MFD1 DB, PFD1 DB). Verify the correct database cycle
information is shown for each database for each display.
Blank Page