Cockpit Reference Guide
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-03 Rev. A
Appendix
102
Flight
InstrumentsEICAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
The Display Database Selection Softkey is used to place the cursor in the Database
Window. Upon first press of the Display Database Selection Softkey, the softkey will
changetoaselectedstate(blacktextongraybackground)andthecursorwillappear
in the Database Window. At this point the user can scroll through all databases in
the Database Window to view status information. If the Display Database Selection
Softkey is selected repeatedly, the softkey will switch between PFD1, PFD2, and MFD1.
Database status information in the Database Window will reflect the database of the
selected PFD or MFD.
Display Database Selection Softkey
Unselected MFD1 DB Selected PFD1 DB Selected
Garmin Databases
The following databases are stored on Supplemental Data Cards provided by
Garmin:
• Expandedbasemap
• Terrain
• Airportterrain
• Obstacle
• SafeTaxi
• FliteCharts
• AirportDirectory
(AOPA)
After subscribing to the desired database product updates, these updated databases
are copied to each Supplemental Data Card for each display (the card that contains the
FliteCharts or ChartView database resides in the MFD). Since these databases are not
stored internally in the displays, these Supplemental Data Cards must remain in the
bottom card slot of each display.
NOTE: The data contained in the terrain and obstacle databases comes from
government agencies. Garmin accurately processes and cross-validates the
data, but cannot guarantee the accuracy and completeness of the data.
Obtaining Garmin Database Updates
The Garmin database updates can be obtained by following the instructions
detailed in the ‘Aviation Databases’ section of the Garmin website (fly.garmin.com).
Once the updated files have been downloaded from the website, a PC equipped with