PRO Control 2 ® Owner’s Manual January 2016 190-01894-00_0B
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction.....................................................................1 Charging the Handheld Device ................................................... 1 Charging the Receiver ................................................................ 1 Turning the Handheld Device On or Off ..................................... 1 Turning the Receiver On and Off ................................................ 1 Selecting an Operating Mode ..................................................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Charging the Handheld Device NOTICE To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer. NOTE: The device does not charge when it is outside the approved temperature range (PRO Control 2 Handheld Device Specifications, page 6).
PRO Control 2 Receiver Overview À Á Â Selected receiver number NOTE: A letter indicating the order of rapid launch activation may also appear. L indicates left ports activate first, and r indicates right ports activate first. Battery charge level Selected sound Receiver Pairing You can pair the PRO Control 2 handheld device with a PRO Control 2 receiver (Pairing a PRO Control 2 Receiver, page 2) or a PRO Control G Series receiver (Pairing with a PRO Control G Series Receiver, page 2).
The red LED is solid when the receiver is in pairing mode. on the handheld device. The red LED on the receiver flashes and turns off. The receiver is paired with the selected number on the handheld device. 4 Within five seconds, select Attaching the Receiver NOTICE Do not attach the receiver in the path of the launch. Verify that the receiver does not interfere with the releasing mechanism of the launch device. 1 Attach the receiver to the mounting plate.
On the handheld device, select to select a color. On the LCD display, moves to a new color each time you select . Each color indicates a different sound. Blue (left) Duck call Black (middle) "Hey, hey, hey" Red (right) Beep/tone Â Ã Ä Select to activate a stimulation on the dog collar device. Select to choose the active dog collar device. Select to switch to remote launcher mode. Dog Training Display PRO Control G Series Receiver Sounds The receiver can play several different sounds.
Continuous stimulation: Applies stimulation to the dog the entire time you press the training key, for a maximum of 8 seconds. Your stimulations should typically be much shorter than 8 seconds. Tone: Activates an audible tone the entire time you press the training key, for a maximum of 8 seconds. A tone can be used as either a positive or negative training cue, depending on your training program.
Changing the Intensity Level CAUTION Contact your local waste disposal department to properly recycle the batteries. You can select a different intensity level for each dog collar device. 1 Select a dog collar device (Selecting a Dog Collar Device, page 5). or to increase or decrease the intensity level. Select 2 The numerical intensity level appears on the LCD display. TIP: You can hold or to cycle through intensity levels quickly.
PRO Control 2 Receiver Components Connecting the Device to Your Computer NOTICE To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer. 1 Pull up the weather cap from the USB port on the device. 2 Plug the small end of the USB cable into the USB port on the device. 3 Plug the large end of the USB cable into a computer USB port.
Index A accessories 6 B battery 1 charging 1 level 2, 4 life 1 replacing 6, 7 C charging handheld 1 receiver 1 collar fitting 4 pairing 4, 5 computer, connecting 7 contact points 4 D data, transferring 7 device, registration 6 dog training 1 training basics 4 training intensity levels 5 dog collar device 4, 5 F files, supported types 7 I intensity level 4 changing 6 choosing 5 K keys 2, 4 P pairing, collar 4, 5 power key 1, 2, 4 product registration 6 R rapid launch 3 receiver attaching 3 connecting
www.garmin.
