nüLink! 1695 ™ owner’s manual 01102436
© 2010 Garmin Ltd. or its subsidiaries Model number: 01102436 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
Table of Contents Table of Contents Getting Started..................... 1 About Your Device...................... 1 Using the Main Menu................. 1 About the Main Menu Toolbar..... 2 Setting Up Your Device.............. 2 Transportation Modes................. 4 Adjusting the Screen Brightness 4 Locking the Screen..................... 5 Powering Off Your Device........... 5 Resetting Your Device................ 5 Adjusting the Volume.................. 5 Navigating the Screens..............
Table of Contents About the Map Pages........ 21 Viewing the Map While Navigating.............................. 21 Viewing Trip Information .......... 22 Viewing the Turn List ............... 22 Viewing the Next Turn.............. 23 Viewing the Junction View........ 23 Using the Pedestrian Navigation Map...................... 24 About Traffic...................... 25 About the Traffic Icon............... 25 Traffic on Your Route................ 26 Viewing the Traffic Map............
Table of Contents Accepting or Declining a Ciao! Invitation................................. 38 Inviting a Friend by Phone Number.................................. 38 Inviting a Friend by E-mail Address.................................. 39 Viewing a Friend’s Ciao! Details.................................... 39 Viewing the Location of a Friend..................................... 39 Removing a Friend................... 40 Disabling Ciao!......................... 40 Data Management..............
Table of Contents Customizing the Device.... 53 System Settings....................... 53 Automobile Navigation Settings.................................. 54 Changing the Map Perspective............................ 55 Proximity Points Settings...... 55 Route Preferences................... 56 About trafficTrends™...................57 About myTrends™........................57 Pedestrian Navigation Settings 58 Display Settings........................ 59 Language Settings...................
Getting Started Getting Started About Your Device Using the Main Menu Warning See the Important Safety and Product Information guide in the product box for product warnings and other important information. ➊ ➋ ➌ ➍ ➊ Power key ➋ microSD™ card slot ➌ Microphone ➍ Micro-USB connector ➊ ➋ ➌ ➍ ➎ • Touch ➊ to find a destination. • Touch ➋ to view the map. • Touch ➌ to make a call when connected to a compatible mobile phone. See www.garmin.com/bluetooth for more information.
Getting Started About the Main Menu Toolbar Icon Description GPS signal status. Touch and hold to view satellite information. Bluetooth® technology status (appears when connected to a compatible device. Touch to change Bluetooth settings). Transportation mode indicator. Touch to select a transportation mode. Current time. Touch to change time settings. Current temperature. Touch to view weather information. nüLink! services signal status. Battery status.
Getting Started 1. Remove the clear plastic from the suction cup ➊. 2. Place the suction cup on the windshield. 3. Flip the lever back toward the windshield. 4. Plug the vehicle power cable ➋ into the back of the cradle. 5. Snap the cradle ➌ onto the suction cup arm. ➊ 8. Tilt your device back until it snaps into place. Charging Your Device Charge your device for at least 4 hours before using it on battery power. Your device can be powered three ways. ➌ ➋ 6.
Getting Started Acquiring Satellites To navigate with your device, you must acquire satellites. 1. Turn on your device. 2. If necessary, go outdoors to an open area, away from tall buildings and trees. Acquiring satellite signals can take a few minutes. Transportation Modes Automobile mode Pedestrian mode Your device offers several transportation modes for navigation methods. Routing is calculated differently based on your transportation mode.
Getting Started Locking the Screen Adjusting the Volume 1. Press and quickly release the Power key. 2. Touch Lock Screen to prevent accidental screen touches. 1. From the main menu, touch Volume. 2. Use the slider bar to adjust the volume. Powering Off Your Device Muting the Audio Touch Volume > audio. 1. Press and quickly release the Power key to view additional options. 2. Touch Power Off to turn off your device. You can also turn off the device by holding the Power key for two seconds.
Getting Started Using the On-Screen Keyboard About Points of Interest • Touch a character on the keyboard to enter a letter or number. • Touch to add a space. • Touch in the text field to move the cursor. • Touch to delete a character. • Touch and hold to erase the entire entry. • Touch to select the keyboard language mode. • Touch to enter special characters, such as punctuation marks. Finding a Point of Interest by Category 1. From the main menu, touch Where To? > Points of Interest. 2.
Getting Started Finding a Point of Interest by Spelling the Name Local Search may not be available in all areas or countries. 1. From the main menu, touch Where To? > Points of Interest > Local Search. 2. Enter all or part of the name. 3. Touch Done. 4. Select an option: • Touch a Local Search result. • Touch the Garmin tab to search the Garmin map data loaded on your device. 5. Touch an item.
Getting Started • Touch Public Transit (if available) to calculate a route that uses public transit and walking. 7. Touch Go!. Adding a Points to the Active Route 1. While navigating a route, touch to return to the main menu. 2. Touch Where To?. 3. Touch a category. 4. If necessary, touch a subcategory. 5. Touch a destination. 6. Touch Go! > Add to Current Route to add the new destination to the active route as a point of interest, also called a via point.
Getting Started Taking a Detour While navigating a route, you can use detours to avoid obstacles ahead of you, such as construction zones. Stopping the Route 1. While navigating a route, touch to return to the main menu. 2. Touch Stop. 1. While navigating a route, touch to return to the main menu. 2. Touch Detour (or Recalculate in Pedestrian mode). If the route you are currently taking is the only reasonable option, the device might not calculate a detour.
Finding Locations Finding Locations The Where To? menu provides several different categories you can use to search for locations. To perform a simple search, see page 6. Finding an Address NOTE: Depending on the version of the maps loaded on your device, the button names and the order of steps could be different from the steps below. NOTE: Not all map data provides postal code searching. 7. Enter the number of the address. 8. Touch Done. 9. Enter the street name. 10. Touch Done. 11.
Finding Locations Using the Go! Page The Go! page opens when you select a location. ➊ ➋ ➌ ➏ ➎ ➍ ➐ • Touch ➊ to call the selected location when your device is connected to a phone, or to save the location to your favorites. • Touch ➋ to switch between 2-D and 3-D view. • Touch ➌ to rotate the view. • Touch ➍ to view more information for the location. • Touch ➎ to zoom in and out. nüLink! 1695 Owner’s Manual • Touch ➏ to return to the previous page. Touch and hold to return to the main menu.
Finding Locations Editing the Phone Number for a Point of Interest If your search results contain an outdated or incorrect phone number for a point of interest, you can edit the phone number. 1. From the Go! page, touch the information balloon. 2. Touch > Edit Phone Number. 3. Enter the phone number. 4. Touch Done. The phone number updates on your device. Rating a Point of Interest When available, you can view and change the star rating for a point of interest. 1.
Finding Locations • Touch Recently Found to set a recently found location as your home location. Going Home Before you can navigate to home, you must set a home location. From the main menu, touch Where To? > Go Home. Resetting Your Home Location 1. From the main menu, touch Where To? > > Set Home Location. 2. Touch an option to change your address. Editing Your Home Location 1. From the main menu, touch Where To? > Favorites > Home. 2. Touch Edit. 3. Enter your changes. 4. Touch Done.
Finding Locations • Touch My Destination to search for places near your current route destination. Viewing a List of Recently Found Locations Your device stores the last 50 locations you have found. From the main menu, touch Where To? > Recently Found. Clearing the List of Recently Found Locations From the main menu, touch Where To? > Recently Found > > Yes. 14 Finding a Destination Using Phone Book Listings Phone book listings may not be available in all areas or countries. 1.
Finding Locations Finding Fuel Prices Fuel prices may not be available in all areas or countries. 1. From the main menu, touch Where To? > Fuel Prices. 2. Touch > Fuel Type. 3. Touch a fuel type. 4. Touch Save. A list of fuel prices at nearby gas stations appears. 5. Touch a gas station. Checking Movie Times Movie times may not be available in all areas or countries. 1. From the main menu, touch Where To? > Movie Times. 2. Touch > Select Day. 3. Touch an upcoming day. 4.
Finding Locations Finding Your Last Parking Spot The device saves your parking spot when you remove the device from the mount while it is operating on external power. From the main menu, touch Where To? > Parking > Last Spot. Finding an Intersection 1. From the main menu, touch Where To? > Intersection. 2. Select an option: • Touch State or Country to select a different country, state, or province. • Touch Spell City to enter the name of a city.
Finding Locations Saving Locations to Favorites 1. Search for the location (page 6). 2. From the Go! page, touch > Save > OK. Finding Favorites 1. From the main menu, touch Where To?. 2. If necessary, touch a category. 3. Touch a saved location. Editing Favorites 1. From the main menu, touch Where To? > Favorites. 2. Touch a category. 3. Touch a favorite. 4. Touch the information balloon. > Edit. 5. Touch 6. Select an option: 7. Edit the information. 8. Touch Done.
Finding Locations Scheduling a Trip Trip Planner allows you to set a departure time and trip duration. 1. From the main menu, touch Where To? > Trip Planner. 2. Touch a trip. 3. Touch a location. 4. Touch Departure Time (or Arrival Time if the location is not the first stop in the trip). 5. Touch a date and time. 6. Touch Save. 7. Touch Duration. 8. Select the amount of time you will spend at the location. 9. Touch Save. 10. If necessary, repeat steps 2–7 for each location. 18 Navigating a Saved Trip 1.
Finding Locations Using the Map Buttons 1. From the main menu, touch Where To? > Browse Map. 2. Touch anywhere on the map. • Touch and to zoom in and out. • Touch to switch between 2-D and 3-D views. • Touch to rotate the view. Browsing the Map by Touching the Screen From the main menu, touch Where To? > Browse Map. • Touch an area on the map to select a location. An information balloon appears next to the location. • Touch and drag the map to view different parts of the map.
Finding Locations 3. Connect your device to your computer using a USB cable (page 42) to manually transfer locations to your device. Locations sent to your myGarmin account are transferred automatically to Favorites (page 16) on your device through nüLink! services. Simulating a Route to a Location 1. From the main menu, touch Tools > Settings > System > GPS Simulator > On > Save. 2. From the main menu, touch Where To? > Browse Map. 3. Touch an area on the map. 4. Touch Go!.
About the Map Pages About the Map Pages Viewing the Map While Navigating notice In no event shall Garmin be liable for any incidental, special, indirect, or consequential damages, including, without limitation, damages for any traffic fines or citations, whether resulting from the use, misuse, or inability to use the product or from defects in the product. Some states do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you.
About the Map Pages • Touch ➎ to change the data field. • Touch ➏ to view information about your current location. • Touch ➐ and drag the map to view a different area of the map. • Touch ➑ to view trip information. • Touch ➒ to report a safety camera. Viewing Trip Information The trip information page displays your current speed and provides statistics about your trip. TIP: If you make frequent stops, leave the device turned on so it can accurately measure elapsed time during the trip.
About the Map Pages the turn indicator in the upper-left corner to view the next turn. Viewing the Junction View 2. Select an option: • Touch a turn on the list to view the next turn. • Touch > Show Map to view the entire route on the map. Viewing the Next Turn On some device models, the junction view displays a view of some upcoming junctions and While navigating a route which lane you should be driving.
About the Map Pages Using the Pedestrian Navigation Map ➊ ➋ ➌ ➎ ➊ ➍ ➎ In Pedestrian mode, your route is displayed on a two-dimensional map. • Touch ➊ to view the next step in the route. • Touch ➋ to view all of the steps in the route. • Touch ➌ to center the map on your current location • Touch ➍ to zoom in and zoom out. • Touch ➎ to change the data field.
About Traffic About Traffic notice The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Traffic information may not be available in all areas or countries.
About Traffic Traffic on Your Route When calculating your route, the device examines the current traffic and automatically optimizes the route for the shortest time. If a severe traffic delay occurs on your route while you are navigating, the device automatically recalculates the route. You might still be routed through traffic if no better alternative routes exist. Manually Avoiding Traffic on Your Route 1. While navigating a route, touch . 2. Touch Traffic On Route. 3.
About Traffic Disabling Traffic 1. From the main menu, touch Tools > Settings > System > Position Reporting > Off. 2. Touch Save. About Offers While you are receiving traffic information, you will receive location-relevant offers and coupons with your traffic information. Adbased traffic is only available in North America. The traffic receiver must be connected to external power and you must be in a coverage area to receive ad-based traffic information.
About nüLink! Services About nüLink! Services nüLink! services may not be available in all areas or countries. Your device includes a basic nüLink! subscription, which is activated when you first turn on your device. nüLink! services allow you to receive current information on fuel prices, flight times, and more. To use these features, you must have a current nüLink! subscription, and your device must be receiving a nüLink! signal. See www.garmin.com/nulink for more information.
About nüLink! Services 2. Touch an item in the list to view details. Renewing nüLink! Services After your subscription ends, you can renew your subscription to continue receiving nüLink! services. 1. From the main menu, touch Tools > nüLink!™ Store > > Account Status. 2. Touch an item in the list. 3. Touch Renew. 4. Touch a purchase option: 5. Touch Purchase. 6. Enter your myGarmin password. Viewing myGarmin Messages nüLink! services allow you to receive messages from myGarmin.
About nüLink! Services Safety Camera Availability Safety camera information may not be available in all areas or countries. Check http://my.garmin .com for availability. Safety camera information is not available in Switzerland. Safety camera information is disabled by default in Germany and Austria. Use of the safety camera database may be a misdemeanor in certain European countries.
About the Hands-Free Features About the HandsFree Features To use the hands-free features, you must pair your phone and your device. For more information, see www.garmin.com/bluetooth. Pairing Using Your Phone Settings Before you can pair and connect, your phone and the device must be turned on and within 33 ft. (10 m) of each other. 1. Enable the Bluetooth component on your phone. 2. On your device, touch Tools > Settings > Bluetooth > Bluetooth. 3. Touch Enabled > Save. 4. Touch Add Phone > OK. 5.
About the Hands-Free Features About Paired Devices • After the initial pairing, the two devices can connect automatically each time you turn them on. • You might have to set your mobile phone to connect to the device automatically when it is turned on. • When your phone is connected to your device, you are ready to make phone calls. • When you turn on the device, it attempts to connect to the last phone to which it was connected.
About the Hands-Free Features Using the Device During a Call During a call, appears on the map and Phone appears on the main menu. Depending on the screen shown on your device, the In Call icon could look different. 1. On the map, touch . 2. Select an option: • Touch Use Handset to turn off the device but remain on the call. • Touch Keypad to view a keypad page for using automated systems such as voice mail. • Touch Mute to mute the microphone. • Touch End Call to end the call.
About the Hands-Free Features About Your Phone Book Each time your phone connects with the device, the phone book is automatically loaded into the device. It can take a few minutes for the phone book to be available. Phone book transfer is not available on all phones. Using Your Phone Book 1. From the main menu, touch Phone > Phone Book. 2. Touch the phone book entry (contact) you want to call. Dialing a Point of Interest 1. From the main menu, touch Phone > Points of Interest. 2.
About the Hands-Free Features Entering Your Phone Number You can enter the phone number you want the device to call when you touch Call Home. 1. From the main menu, touch Phone > Call Home. 2. Touch Enter Phone Number. 3. Enter the phone number. 4. Touch Done > Yes. The device dials your home phone number. Calling Home From the main menu, touch Phone > Call Home.
About Ciao! About Ciao!™ Ciao! periodically sends your location to our partner networks and downloads the most-recent location of your friends. This application only submits your location when you tell it to, unless you enable automatic updates. See www.garmin.com /nulink for more information. Ciao! may not be available in all areas or countries. About Ciao! Networks CAUTION Use caution when sharing your location information with others. Ciao! may support multiple locationbased social networks.
About Ciao! status message appears. These statuses may appear if you are not receiving updates from a friend. • Invited—You have invited this friend, but he or she has not yet accepted your invitation. • Pending—This friend has invited you, but you have not yet accepted his or her invitation. • Hidden—This friend has temporarily disabled updates. Updating Your Ciao! Status Message 1. From the main menu, touch Tools > Ciao! > > Update. 2. Enter a status message with up to 255 characters. 3. Touch Done.
About Ciao! Changing Your Ciao! Visibility You can choose whether to send location updates to your Ciao! friends by changing your visibility. • From the main menu, touch Tools > Ciao! > > > Hide > Yes. Your friends will not be able to view your location and status information. • Touch > Show > Yes to make your information visible again. Accepting or Declining a Ciao! Invitation 1. From the main menu, touch Tools > Ciao!. 2. Touch the friend who sent you the invitation. 3. Touch Accept or Decline.
About Ciao! Inviting a Friend by E-mail Address 1. From the main menu, touch Tools > Ciao! > > Invite by E-mail address. 2. Enter the e-mail address that your friend has registered with Ciao!. 3. Touch Done. The friend you invited appears in your friends list. Your friend must accept your invitation before you can view your friend’s location. Viewing a Friend’s Ciao! Details 1. From the main menu, touch Tools > Ciao!. The friends list appears. 2. Touch a friend in the list.
About Ciao! Removing a Friend To stop sharing location information with a friend, you can remove that friend from Ciao!. 1. From the main menu, touch Tools > Ciao!. 2. Touch a friend in the list. 3. Touch > Remove. 4. Touch Yes. Disabling Ciao! You can disable the Ciao! service on your device if you no longer want to use it. NOTICE If you disable Ciao!, you will be unregistered from Ciao! and our partner networks, and all Ciao! friends and Ciao! data will be removed from your device. 1.
Data Management Data Management You can store files, such as JPEG image files, on your device. The device has a memory card slot for additional data storage. NOTE: The device is not compatible with Windows® 95, 98, Me, Windows NT®, and Mac® OS 10.3 and earlier. Compatible File Types The device supports multiple file types. • .jpg image files. • Maps and .gpx waypoint files from MapSource® (page 66). • .gpi custom POI files from Garmin POI Loader (page 66).
Data Management Connecting Your Device to Your Computer 1. Connect the larger end of the USB cable to a USB port on your computer. 2. Connect the micro-USB connector to the device. The myGarmin Agent™ appears. This service monitors your computer USB ports and allows you to easily check for available updates. Two additional drives (volumes) appear in the list of drives on your computer. One is the internal memory of the device. The other is the memory card.
Data Management Deleting Files from Your Device Notice If you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted. Be especially cautious of folders entitled “Garmin.” Disconnecting the USB Cable 1. Complete an action: • For Windows computers, click in your system tray. • For Mac computers, drag the volume icon into the Trash . 2. Disconnect the cable from your computer. 1. Connect your device to your computer (page 42). 2.
Using the Tools Using the Tools Accessing the Device Settings For information about the settings, see pages 53–60. Viewing Current Location Information Use the Where Am I? page to view information about your current location. This feature is helpful if you need to tell emergency personnel your location. 1. From the main menu, touch Tools > Where Am I?. 2. Touch Hospitals, Police Stations, or Fuel to view the nearest locations in that category.
Using the Tools and driving habits, calibrate the fuel economy (page 45). Using ecoRoute The first time you use the ecoRoute features, you must enter vehicle information. 1. From the main menu, touch Tools > ecoRoute. 2. If necessary, enter fuel and mileage information. 3. Touch Done. Calibrating the Fuel Economy Calibrate the fuel economy to receive more accurate fuel reports for your specific vehicle and driving habits. Calibrate when you fill up your fuel tank. 1.
Using the Tools About ecoChallenge ecoChallenge helps you maximize your fuel economy by scoring your driving habits. The higher your ecoChallenge scores, the more fuel you save. ecoChallenge collects data and calculates a score whenever your device is moving and in Automobile transportation mode. Viewing Your ecoChallenge Scores From the main menu, touch Tools > ecoRoute > ecoChallenge.
Using the Tools Viewing Fuel Economy Information 1. From the main menu, touch Tools > ecoRoute > Fuel Economy. 2. Touch a section of the graph to zoom in. Resetting Your Vehicle Profile 1. From the main menu, touch Tools > ecoRoute > Vehicle Profile. 2. Touch > Reset. 3. Touch Yes. Viewing the Mileage Report Mileage reports provide the distance, the time, the average fuel economy, and the fuel cost of navigating to a destination. You can view up to 20 mileage reports on your device.
Using the Tools Viewing Weather Information CAUTION The weather information provided through this product is subject to service interruptions and may contain errors, inaccuracies, or outdated information, and consequently should not be relied upon exclusively. Always use common sense while driving or navigating, and check alternate weather information sources prior to making safety-related decisions.
Using the Tools • Touch > Favorite Cities to view weather information for cities you have added. current location. For example, the weather icon changes to if rain is near your current location. Viewing the Weather Radar The weather radar service is available through your nüLink! subscription as premium content. For more information about purchasing nüLink! subscriptions, see page 28. About Weather Alerts Weather alerts are available through your nüLink! subscription as premium content.
Using the Tools • Touch Check Flight Number to search by flight number. • Touch Search Arrivals to search by arrival. • Touch Search Departures to search by departure. 4. Touch a flight. 5. If your flight has multiple connections, touch Next Leg to check the next flight. Using the Picture Viewer View pictures that you have stored in your device or on a memory card. 1. From the main menu, from the main menu, touch Tools > Picture Viewer. 2.
Using the Tools Using Photo Navigation You can navigate to photos that include location information, called geotags. Go to http://connect.garmin .com/photos for more information. 1. From the main menu, touch Where To? > Favorites > Photos. 2. Touch a photo. 3. Touch an option. Using the Currency Converter Currency conversion rates update automatically through your nüLink! service (page 28). NOTE: nüLink! services are not available in all areas or countries. 1. From the main menu, touch Tools > Currency.
Using the Tools Viewing the World Map Touch to view the world map. Nighttime hours are shown in the shaded area. Using the Calculator Touch Tools > Calculator. 52 Using the Unit Converter 1. From the main menu, touch Tools > Unit Converter. 2. Touch the button next to Convert. 3. Touch a type of measurement. 4. Touch Save. 5. Touch a unit of measure that you want to change. 6. Touch a unit of measure. 7. Touch OK. 8. Touch the number field. 9. Enter a value. 10. Touch Done.
Customizing the Device Customizing the Device 1. Touch Tools > Settings. • • 2. Touch the setting you want to change. System Settings • From the main menu, touch Tools > Settings > System. • GPS Simulator—stops the device from receiving a GPS signal, and saves battery power. • Units—allows you to change the units of measure to kilometers or miles. • Time Format—allows you to nüLink! 1695 Owner’s Manual • • select a 12-hour, 24-hour, or UTC display time.
Customizing the Device you update the system software or purchase additional map data (pages 66). • End User License Agreements—displays the device end user license agreements. Automobile Navigation Settings From the main menu, touch Tools > Settings > Navigation > Automobile. • nüRoute™—(page 56) • Map Detail—sets the level of detail on the map. More detail may result in slower map drawing. • Map View—sets the perspective on the map page. 54 • Map Theme—changes the color of the map data.
Customizing the Device Changing the Map Perspective 1. From the main menu, touch Settings > Navigation > Automobile > Map View. 2. Select an option: • Touch Track Up to display the map in two dimensions (2-D) with your direction of travel at the top. • Touch North Up to display the map in 2-D with North at the top. • Touch 3–D to display the map in three dimensions (3-D) in Track Up. 3. Touch Save.
Customizing the Device Route Preferences The route calculation is based on road speeds and vehicle acceleration data for a given route. • Off Road—calculates point-topoint routes (without regard to roads). From the main menu, touch Tools > Settings > Navigation > Automobile > nüRoute > Calculation Mode. Using Prompted Route Calculation Prompted route calculation creates routes in multiple modes, and allows you to select the mode you want.
Customizing the Device Avoiding Road Features 1. From the main menu, touch Tools > Settings > Navigation > Automobile > nüRoute > Avoidances. 2. Touch the road features to avoid on your routes. 3. Touch Save. About trafficTrends ™ When the trafficTrends feature is enabled, your device uses historic traffic information to calculate moreefficient routes. Different routes may be calculated based on traffic trends for the day of the week or based on the time of day.
Customizing the Device Enabling myTrends 1. From the main menu, touch Tools > Settings > Navigation > Automobile > nüRoute > myTrends. 2. Touch Enabled. 3. Touch Save. • Limit Walking—controls how much of a public transit route will include walking. • Public Transit—avoids selected transit types. • Trip Log—displays the path of your travels on the map. Creating a Route with myTrends 1.
Customizing the Device Display Settings From the main menu, touch Tools > Settings > Display. • Color Mode—sets a light background (Day), a dark background (Night), or automatically switches between the two based on the sunrise time and the sunset time for your current location (Auto). • Brightness—changes the brightness of the screen. Decreasing the brightness can save battery power. • Display Timeout—sets how the screen automatically shuts off if the device is inactive for the selected length of time.
Customizing the Device Language Settings From the main menu, touch Tools > Settings > Language. • Voice Language—sets the language for voice prompts. • Text Language—sets all on-screen text to the selected language. NOTE: Changing the text language does not change the language of user-entered data or map data, such as street names. • Keyboard Language—sets the language for your keyboard. • Keyboard Layout�—sets the keyboard layout. 60 Restoring the Original Device Settings 1.
Appendix Appendix About GPS Satellite Signals The icon in the upper-left corner of the status bar indicates the GPS signal strength. When at least one of the lines is green, your device has acquired satellite signals. The more green lines, the stronger the GPS signal. If the device is not receiving GPS signals, a red x appears. For troubleshooting information about acquiring satellites, see page 70. For more information about GPS, go to www.garmin.com/aboutGPS.
Appendix Cleaning the Unit The device is constructed of highquality materials and does not require user maintenance other than cleaning. • Clean the outer casing of the unit (not the touchscreen) using a cloth dampened with a mild detergent solution, and then wipe it dry. • Avoid chemical cleaners and solvents that can damage plastic components. Cleaning the Touchscreen 1. Apply water, isopropyl alcohol, or eyeglass cleaner to a soft, clean, lint-free cloth. 2. Gently wipe the touchscreen.
Appendix 4. Touch Save. 5. Enter a four-digit PIN. 6. Touch Done. Each time you turn on the device, you must enter the PIN or drive to the security location. Retrieving Your PIN If you forget your PIN and your security location, you must send your device to Garmin to get it unlocked. You must also send a valid product registration or proof of purchase. Calibrating the Screen If the touchscreen is not responding properly, calibrate the touchscreen. 1. Turn off the device. 2.
Appendix Clearing User Data Notice This deletes all user-entered information. 1. Hold your finger on the lowerright corner of the device screen while turning on the device. 2. Keep your finger pressed until a message appears. 3. Touch Yes to clear all user data. All original settings are restored. Battery Information in the status bar indicates the status of the internal battery. Fully discharge the battery and then fully charge it to increase the accuracy of the battery gauge.
Appendix dashboard and comply with certain state and local regulations. 1. Clean and dry the dashboard where you are placing the disk. 2. Remove the backing from the adhesive on the bottom of the disk. 3. Place the disk on the dashboard. 4. Remove the clear plastic cover from the top of the disk. 5. Place the suction cup mount on top of the disk. 6. Flip the lever down (toward the disk). Removing the Cradle from the Mount 1. Turn the cradle to the right or left. 2.
Appendix nüMaps Guarantee™ To receive one free map update (if available), register your device at http://my.garmin.com within 60 days of acquiring satellites while driving with your device. You are not eligible for the free map update if you register by phone or wait longer than 60 days after the first time you acquire satellites while driving with your device. For more information, go to www.garmin.com/numaps.
Appendix device using POI loader software available at www.garmin.com /products/poiloader. See the POI Loader help file for more information. Finding Extras 1. From the main menu, touch Where To? > Extras. 2. Touch a category. Garmin Travel Guide The Garmin Travel Guide provides detailed information about places, such as restaurants and hotels. To purchase an accessory, go to http://buy.garmin.com or contact your Garmin dealer. Using the Garmin Travel Guide 1.
Appendix Registering Your Device Help us better support you by completing our online registration today. • Go to http://my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. Updating the Software 1. Connect the device to your computer using the micro-USB cable. The AutoPlay menu opens. 2. Select an option: • If you are using a PC, double-click to open the myGarmin Agent Web page. • If you are on a Mac® computer, go to www.garmin .com/agent.
Appendix Specifications Physical size (W × H ×D): 5.52 × 3.45 × 0.74 in. (14.02 × 8.76 × 1.89 cm) Weight: 8.17 oz. (231.6 g) Display: 5.0 in. diagonal, 480 × 272 pixels; 64K colors; bright WQVGA TFT landscape display; white backlight; touchscreen Case: Not waterproof (IPXO) Operating temperature range: From 32°F to 140°F (From 0°C to 60°C) Charging temperature range: From 32°F to 113°F (From 0°C to 45°C) Data storage: Internal memory and optional removable microSD card. Data stored indefinitely.
Appendix Troubleshooting Problem/Question My device never gets satellite signals. My device does not charge in my vehicle. My battery does not stay charged for very long. How do I clear all of my user data? Solution/Answer Ensure the GPS simulator is turned off. 1. From the main menu, touch Settings > System > General > GPS Simulator > Off. 2. Take your device out of parking garages and away from tall buildings and trees. 3. Remain stationary for several minutes.
Appendix Problem/Question How do I know my device is in USB mass storage mode? My computer never senses that the device is connected. I cannot see any new removable drives in my list of drives. How can I find restaurants near the hotel I will be staying at in the future? Solution/Answer When your device is in USB mass storage mode, a picture of a device connected to a computer is shown. Also, you should see two new removable disk drives listed in My Computer. 1. Unplug the USB cable from your computer. 2.
Index Index Symbols 2-D, 3-D map view 55 A additional maps 66 address white pages 10 alerts safety camera 29 audio version 53 avoiding road types 57 B background color 59 battery 64 Bluetooth technology 31–35 pairing with phone 31 brightness 4 browsing the map 19 72 C calculator 52 call answering 32 call waiting 33 history 34 home 35 caring for your device 61 charging your device 3 Ciao! decline invite 38 enable 36 hide location 38 invite by e-mail address 39 invite by phone number 38 remove a friend 40 s
Index E ecoRoute 44 calibrate fuel economy 45 ecoChallenge score 46 mileage report 47 editing destinations 18 saved trips 18 editing a phone number 12 extras 66–67 F Favorites 16, 17 files deleting 43 supported types 41 finding an intersection 16 finding locations using the map 19 finding parking 15 finding points of interest by address 10 by category 6 by coordinates 20 by postal code 10 by spelling the name 7, 13 in pedestrian mode 7 recent selections 14 saved places (Favorites) 17 finding your parking
Index lock the screen 5 longitude 20 M map adding 66 detail level 54 pedestrian 24 viewing 54 maps browsing 19 zooming 19 MapSource 41, 66 measurements, converting 52 memory cards 41 installing 41 mileage report 47 miles 53 mounting on dashboard 64 removing from mount 65 movie times 15 74 mute audio 5 myGarmin Agent 42 myGarmin messages 29 myTrends 57 N navigation 21 off road 8 settings 54 next turn 23 nüLink! services 28 account status 28 Ciao! 36 currency converter 51 Flight Status 49 fuel prices 15 loc
Index prompted, routing 56 public transit city maps 7, 24, 58 options 24 routes off road 8, 56 prompted 56 stopping 9 R rating a POI 12 recalculating routes 9 recently found locations 14 registering 62 removing from the cradle 65 removing the mount 65 removing the suction cup 65 renaming trips 18 reporting map errors 11 resetting the max speed 22 trip data 22 your device 5 S safety cameras 29 availability 30 reporting 30 turning off 30 saving places you find 17 your current location 16 screen brightness
Index trip planner 17 saved trips 18 scheduling 18 turn list 22 U unit converter 52 unit ID 53 upcoming events 15 updating maps 66 software 68 user data, delete 64 Where Am I? 44 Where To? 10–20 world clock 51 Z zoom 19 V vehicle icon 54 vehicle profile 47 voice dial 35 voice language 60 voice mail 33 volume 5 W weather different location 48 radar 49 76 nüLink! 1695 Owner’s Manual
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. 0682 © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan www.garmin.com July 2010 Part Number 190-01200-00 Rev.
