User manual
Table Of Contents
- Table of Contents
- Introduction
- inReach Features
- Viewing the Main Pages
- Connected Features
- Navigation
- Where To? Page
- Waypoints
- Saving Your Current Location as a Waypoint
- Saving a Location on the Map as a Waypoint
- Navigating to a Waypoint
- Finding a Waypoint
- Editing a Waypoint
- Deleting a Waypoint
- Changing the Photo for a Waypoint
- Increasing the Accuracy of a Waypoint Location
- Projecting a Waypoint from a Saved Waypoint
- Moving a Waypoint on the Map
- Finding a Location Near a Waypoint
- Setting a Waypoint Proximity Alarm
- Adding a Waypoint to a Route
- Repositioning a Waypoint to Your Current Location
- Routes
- Recordings
- Courses
- Weather
- Main Menu Applications
- Customizing the Main Menu
- Garmin Adventures
- Setting an Alarm
- Calculating the Size of an Area
- BirdsEye Imagery
- Camera and Photos
- Dog Tracking
- Using the Flashlight
- Geocaches
- Using the inReach Remote
- Marking and Starting Navigation to a Man Overboard Location
- Selecting a Profile
- Setting a Proximity Alarm
- Satellite Page
- Sending and Receiving Data Wirelessly
- Using the VIRB Remote
- Customizing the Device
- Custom Data Fields and Dashboards
- Rotating the Screen
- Setup Menu
- System Settings
- Display Settings
- Bluetooth Settings
- Wi‑Fi Settings
- Routing Settings
- Turning On Expedition Mode
- Setting the Device Tones
- Camera Settings
- Geocaching Settings
- Wireless Sensors
- Fitness Settings
- Marine Settings
- Menu Settings
- Position Format Settings
- Changing the Units of Measure
- Time Settings
- Accessibility Settings
- Profiles
- Resetting Data and Settings
- Device Information
- Appendix
- Index
Installing AA Batteries
Instead of the included lithium-ion battery pack (Installing the Lithium-ion Battery, page 3), you can use three AA
batteries with an optional AA battery pack (not included). This is useful when you are on the trail and cannot
charge the lithium-ion battery pack. Garmin recommends lithium AA batteries for best results.
NOTE: The optional AA battery pack is compatible with the Montana 700 device only.
1 Turn the D-ring counterclockwise to remove the lithium-ion battery pack from the Montana 700 device.
2 Slide the latch to open the AA battery pack.
3 Insert three AA batteries, observing polarity, and close the battery pack.
4 Insert the AA battery pack into the back of the device, turn the D-ring clockwise, and press the D-ring flat
against the back of the device.
5 Hold .
6 Select Setup > System > Battery Type.
7 Select Alkaline, Lithium, NiMH, or Precharged NiMH.
56 Device Information