User manual

Routes
A route is a sequence of waypoints or locations that leads you to your final destination. Routes are saved as
GPX files on the device.
Creating a Route
1 Select Route Planner > Create Route > Add Point.
2 Select a category.
3 Select the first point in the route.
4 Select Add.
5 Select Add Point to add additional points to the route.
6 Select Done.
7 Edit the route name if necessary, and select to save the route.
Creating a Route Using the Map
1 Select Route Planner > Create Route > Add Point > Use Map.
2
Select a point on the map.
3 Select Add.
4 Move the map, and select additional points on the map to add to the route.
5 Edit the route name if necessary, and select to save the route.
Creating a Round-Trip Route
The device can create a round-trip route based on a specified distance and a starting location.
1 Select > Round-Trip Routing.
2 Select Distance, and enter the total distance for the route.
3 Select Start Location.
4 Select an option:
• Select Current Location.
NOTE: If the device cannot acquire satellite signals to determine your current location, the device prompts
you to use the last known location or to select the location on the map.
• Select Use Map to select a location on the map.
5 If necessary, select Activity to change the activity type for route calculation.
6 Select Search.
The device creates up to three courses.
TIP: You can select Search again to generate different routes.
7 Select a route to view it on the map.
8 Select Go.
Navigating a Saved Route
1 Select > Routes.
2 Select a route.
3 Select Go.
By default, your route appears as a straight, colored line on the map.
24 Navigation