User manual
Table Of Contents
- Table of Contents
- Introduction
- inReach Features
- Viewing the Main Pages
- Connected Features
- Navigation
- Where To? Page
- Waypoints
- Saving Your Current Location as a Waypoint
- Saving a Location on the Map as a Waypoint
- Navigating to a Waypoint
- Finding a Waypoint
- Editing a Waypoint
- Deleting a Waypoint
- Changing the Photo for a Waypoint
- Increasing the Accuracy of a Waypoint Location
- Projecting a Waypoint from a Saved Waypoint
- Moving a Waypoint on the Map
- Finding a Location Near a Waypoint
- Setting a Waypoint Proximity Alarm
- Adding a Waypoint to a Route
- Repositioning a Waypoint to Your Current Location
- Routes
- Recordings
- Courses
- Weather
- Main Menu Applications
- Customizing the Main Menu
- Garmin Adventures
- Setting an Alarm
- Calculating the Size of an Area
- BirdsEye Imagery
- Camera and Photos
- Dog Tracking
- Using the Flashlight
- Geocaches
- Using the inReach Remote
- Marking and Starting Navigation to a Man Overboard Location
- Selecting a Profile
- Setting a Proximity Alarm
- Satellite Page
- Sending and Receiving Data Wirelessly
- Using the VIRB Remote
- Customizing the Device
- Custom Data Fields and Dashboards
- Rotating the Screen
- Setup Menu
- System Settings
- Display Settings
- Bluetooth Settings
- Wi‑Fi Settings
- Routing Settings
- Turning On Expedition Mode
- Setting the Device Tones
- Camera Settings
- Geocaching Settings
- Wireless Sensors
- Fitness Settings
- Marine Settings
- Menu Settings
- Position Format Settings
- Changing the Units of Measure
- Time Settings
- Accessibility Settings
- Profiles
- Resetting Data and Settings
- Device Information
- Appendix
- Index
Viewing Plan Details
1 Select inReach > inReach Utilities.
2 Select .
Viewing Data Use
You can view the number of messages, preset messages, and track points sent during the current billing cycle.
The data use counter resets automatically at the beginning of each billing cycle.
1 Select inReach > inReach Utilities.
2 Select .
Viewing the Main Pages
The information needed to operate this device is found on the main pages. Default pages include the main
menu, map, compass, trip computer, and Where To? pages.
• Select the icons in the Favorites bar to scroll through the main pages.
• Hold an icon in the Favorites bar, and drag it to a new location to change the order of the icons or remove an
icon.
TIP: You can also select Setup > Menus > Favorites to customize the Favorites bar. The and icons
cannot be removed or changed.
Map
represents your location on the map. As you travel, moves and displays your path. Depending on your zoom
level, waypoint names and symbols may appear on the map. You can zoom in on the map to see more detail.
When you are navigating to a destination, your route is marked with a colored line on the map.
Navigating with the Map
1 Begin navigating to a destination (Navigating to a Destination, page 20).
2 From the map, complete one or more actions:
• Drag the map to view different areas.
• Pinch or spread two fingers on the touchscreen to zoom in and out of the map.
• Select and to zoom in and out of the map.
• Double-tap the map to quickly zoom in.
• Select a location on the map (represented by a pin), and select the information bar at the top of the screen
to view information about the selected location.
• Select to select which map layers display on the map.
Map Page Settings
From the map, select .
Stop Navigation: Stops navigating the current route.
Map Setup: Enables you to open additional map settings (Map Settings, page 13).
Measure Distance: Allows you to measure the distance between multiple locations (Measuring Distance on the
Map, page 13).
Restore Defaults: Restores the map to factory default settings.
12 Viewing the Main Pages