System Maintenance Manual

Page 3-12 G1000/GFC700 System Maintenance Manual – C90A/C90GT/C90GTi King Air
Revision F 190-00682-01
3.7.4 Configuration Mode Navigation
Using the FMS knob as described in Section 3.1.2, a user can navigate through different pages and page
groups in the Configuration Mode. For complete description and breakdown of each page, refer to the
G1000 System Maintenance Manual listed in Table 1-2.
System Page Group
1. System Status 6. Diagnostics Terminal 11. Manifest Configuration
2. Time Configuration 7. OEM Diagnostics 12. Maintenance Log
3. Lighting Configuration 8 System Configuration
4. System Audio 9. System Data Path Configuration
5. System Upload 10. System Setup
GDU Page Group
1. Serial Configuration 4. Diagnostics 7. Alert Configuration
2. CDU Status Page 5. Ethernet Test 8. Airframe Configuration
3. Key Test 6. Video Test 9. TAWS Configuration
GIA Page Group
1. Serial Configuration 3. GIA I/O Configuration 5. GIA Status Page
2. GIA / RS-485 Configuration 4. GIA Configuration 6. GIA CAN Configuration
GEA Page Group
1. Engine Configuration 2. GEA Status Page 3. GEA Configuration
GTX Page Group
1. Serial Configuration 2. Transponder Configuration
GRS Page Group
1. Inputs Configuration 2. GRS / GMU Calibration
ADC Page Group
1. ADC Configuration 2. GDC Configuration
GFC Page Group
1. GFC Configuration 2. GFC Status
GMA Page Group
1. GMA Configuration
GDL Page Group
1. GDL 69
RMT Page Group
1. Remote Controller Status
GWX Page Group
1. GWX Configuration
CAL Page Group
1. Fuel Tank Calibration 2. Flaps & Trim Calibration 3. HSCM Calibration