System Maintenance Manual

G1000/GFC700 System Maintenance Manual – C90A/C90GT/C90GTi King Air Page 8-1
190-00682-01 Revision F
8 System Return to Service Procedure
After reinstalling any G1000 LRU, verify the correct LRU software part numbers and versions against the
numbers listed on the General Arrangement drawing, listed in Table 1-2. To check an LRU software part
number and/or version, follow the procedure defined in Section 3.9.3.
IMPORTANT!
It is essential that the software versions be checked and matched against the listed
versions in the General Arrangement drawing listed in Table 1-2. Software
Configuration is a critical part of the G1000 operation and must be verified before
returning an aircraft to service.