Pilot's Guide

190-00663-02 Rev. B
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
65
FLIGHT INSTRUMENTS
Navigationangles(track,heading,course,bearing)arecorrectedtothecomputedmagneticvariation(‘Mag
Var’) or referenced to true north (denoted ‘T’), set on the AUX - System Setup Page.  When an approach
referenced to true north has been loaded into the flight plan, the system generates a message to change the
navigationanglesettingto‘True’attheappropriatetime.
Figure 2-21 Heading and Course Indications (True)
Changing the navigation angle setting:
1) Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2) If necessary, press the SETUP 1 Softkey to display the System Setup 1 Page.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight ‘Nav Angle’ in the ‘Display Units’ box (Figure 2-22).
5) Turn the small FMS Knob to highlight the desired setting and press the ENT Key.
 •TRUE - References angles to true north (denoted with ‘T’)
 •MAGNETIC - Angles corrected to the computed magnetic variation (‘Mag Var’)
Figure 2-22 System Setup Page, Navigation Angle Settings