Pilot's Guide

190-00663-02 Rev. B
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
539
APPENDIX A
Message Comments
MFD1 DB ERR – MFD1 Chartview
database error exists.
The MFD and/or PFD detected a failure in the Chartview database (optional feature).
Ensure that the data card is properly inserted. Replace data card. If problem
persists, the G1000 system should be serviced.
MFD1 DB ERR – MFD1 FliteCharts
database error exists.
The MFD and/or PFD detected a failure in the FliteCharts database (optional feature).
Ensure that the data card is properly inserted. Replace data card. If problem
persists, the G1000 system should be serviced.
MFD1 DB ERR – MFD1 Airport
Directory database error exists.
The MFD detected a failure in the Airport Directory database. Ensure the data card
is properly inserted. Replace data card. If problem persists, the system should be
serviced.
DB MISMATCH – Navigation database
mismatch. Xtalk is off.
The PFDs and MFD have different navigation database versions or regions installed.
Crossfill is off. Check the AUX-SYSTEM STATUS Page to determine versions or
regions. Also, check the AUX-SYSTEM STATUS Page for a database synchronization
function not completed. After synchronization is complete, power must be turned off,
then on.
DB MISMATCH – Standby Navigation
database mismatch.
The PFDs and MFD have different standby navigation database versions or regions
installed. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function
not completed. After synchronization is complete, power must be turned off, then on.
DB MISMATCH – Terrain database
mismatch.
The PFDs and MFD have different terrain database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to determine versions or regions. Also,
check the AUX-SYSTEM STATUS Page for a database synchronization function not
completed. After synchronization is complete, power must be turned off, then on.
DB MISMATCH – Obstacle database
mismatch.
The PFDs and MFD have different obstacle database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to determine versions or regions. Also,
check the AUX-SYSTEM STATUS Page for a database synchronization function not
completed. After synchronization is complete, power must be turned off, then on.
DB MISMATCH – Airport Terrain
database mismatch.
The PFDs and MFD have different airport terrain database versions or regions
installed. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function
not completed. After synchronization is complete, power must be turned off, then on.
GMA 1347D MESSAGE ADVISORIES
Message Comments
GMA1 FAIL – GMA1 is inoperative.
The audio panel self-test has detected a failure. The audio panel is unavailable. The
G1000 system should be serviced.
GMA2 FAIL – GMA2 is inoperative.
GMA XTALK – GMA crosstalk error
has occurred.
An error has occurred in transferring data between the two GMAs. The G1000 system
should be serviced.
GMA1 CONFIG – GMA1 configuration
error. Config service req’d.
The audio panel configuration settings do not match backup configuration memory.
The G1000 system should be serviced.
GMA2 CONFIG – GMA2 configuration
error. Config service req’d.