Pilot's Guide

190-00663-02 Rev. B
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
391
HAZARD AVOIDANCE
Displaying traffic on the Navigation Map
1) Ensure that the TAS system is operating. With the Navigation Map displayed, select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map as shown in the figure.
Figure 6-114 TAS Traffic on the Navigation Map Page
“Non-Bearing”
Traffic Advisory
Traffic Advisory
Off-Scale
Non-Threat
Traffic, 2500’
Above,
Descending
Traffic Advisory,
500’ Below,
Climbing
Proximity Traffic,
900’ Above,
Level
Non-Threat
Traffic, Altitude
Not Available
Traffic Display
Enabled Icon
Displaying traffic information (PFD Inset Map):
1) Select the INSET Softkey.
2) Select the TRAFFIC Softkey to display traffic data on the inset map (TRFC-1).
3) Select the softkey again to display the traffic-only inset (TRFC-2).
4) Select the softkey again to remove traffic data.