Pilot's Guide

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
190-00663-02 Rev. B352
HAZARD AVOIDANCE
6) Turn the small FMS Knob to select the maximum display range.
7) Press the ENT Key.
8) Press the FMS Knob to return to the Navigation Map Page.
TochangethedisplayrangeontheNavigationMapPage,turntheRANGE Knobclockwisetozoomoutor
counter-clockwisetozoomin.
SELECTING THE STORMSCOPE PAGE
Stormscopelightningdatacanbedisplayedattherangesof25nm,50nm,100nm,and200nm.
Adjusting the Stormscope Map Range:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Stormscope Page.
3) To change the map range, turn the RANGE Knob clockwise to zoom out or counter-clockwise to zoom in.
Figure 6-78 Stormscope Page
Changing between ‘cell’ and ‘strike’ mode:
1) Select the Stormscope Page.
2) Select the MODE Softkey. The CELL and STRIKE softkeys are displayed.
3) Select the CELL Softkey to display ‘CELL’ data or select the STRIKE Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box in the upper left corner of the Stormscope Page.
4) Press the BACK Softkey to return to the Stormscope Page.
Or:
1) Select the Stormscope Page.
2) Press the MENU Key.