Pilot's Guide

190-00663-02 Rev. B
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
349
HAZARD AVOIDANCE
SETTING UP STORMSCOPE ON THE NAVIGATION MAP
Setting up Stormscope options on the Navigation Map:
1) On the Navigation Map Page, press the MENU Key.
2) With ‘Map Setup’ selected (Figure 6-73), press the ENT Key.
3) Turn the small FMS Knob to display the group selection window. Turn the small FMS Knob to select ‘Weather’,
and press the ENT Key.
4) Turn the large FMS Knob to highlight and move between the product selections (Figure 6-74).
5) When an item is highlighted, turn the small FMS Knob to select the option.
6) Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page (Figure 6-75).
Thefollowingoptionsareavailable(Figure6-74):
•STRMSCP LTNG–TurnsthedisplayofStormscopedataonoroff.
•STRMSCP MODE–SelectstheCELLorSTRIKEmodeoflightningactivity.Cellmodeidentiesclusters
orcellsofelectricalactivity.Strikemodeindicatestheapproximatelocationoflightningstrikes.
•STRMSCP SMBL–SelectstherangeatwhichStormscopedatadisplays.Stormscopedataisremoved
whenamaprangegreaterthantheSTRMSCPSMBLvalueisselected.
Figure 6-73 Navigation Map Page Menu
Figure 6-74 Map Setup Menu