Pilot's Guide

190-00663-02 Rev. B

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi

SYSTEM OVERVIEW

GND Manually selects Ground Mode, the transponder does not allow Mode A and Mode C

replies, but it does permit acquisition squitter and replies to discretely addressed

Mode S interrogations

VFR Automatically enters the VFR code (1200 in the U.S.A. only)

CODE Displays transponder code selection softkeys 0-7

0 — 7 Use numbers to enter code

BKSP Removes numbers entered, one at a time

ADS-B TX Enables/disables automatic transmission of ADS-B position and speed.(optional)

IDENT Activates the Special Position Identiﬁcation (SPI) pulse for 18 seconds, identifying the

transponder return on the ATC screen

TMR/REF Displays Timer/References Window

NRST Displays Nearest Airports Window

ALERTS Displays Alerts Window

Figure 1-16 Top Level PFD Softkeys

ALERTS

(optional)

Figure 1-17 INSET Softkeys

Select the BACK Softkey

to return to the top-level softkeys.

STRMSCP

ALERTS

(

optional

)

(optional)

METAR

(optional)(optional) (optional)

TRFC-1

TRFC-2

WX LGND

(optional)