Pilot's Guide

190-00663-02 Rev. B Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi 108
AUDIO PANEL AND CNS
AUTO-TUNING FROM THE MFD
LoadfrequenciesintotheCOMFrequencyBoxfrompagesintheNRSTorWPTpagegroupbyhighlighting
the frequency and pressing the ENTKey(Figures4-9,4-10,and4-11).
Auto-tuning a COM frequency from the WPT and NRST Pages:
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or
selecting the appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-11).
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key on either PFD to transfer the frequency to the COM Active Frequency
Field.
Figure 4-9 Frequency Auto-Tuning from the MFD
Press the ENT Key to Load a
Highlighted Frequency into the
COM Standby Frequency Box.
Turn the
FMS Knob to Scroll Through a
List of Frequencies.
Or:
1) Press the MENU Key (Figure 4-9) to display the page menu (Figure 4-10).
2) Turn the large FMS Knob to scroll through the menu options.
3) Press the ENT Key to place the cursor on the desired selection.
4) Scroll through the frequency selections with the FMS Knob or the ENT Key.
5) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
6) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.