Pilot's Guide

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
190-00663-02 Rev. B92
ENGINE INDICATION SYSTEM
TNTERSTAGE TURBINE TEMPERATURE
The Interstage Turbine Temperature (ITT) Gauge is displayed at the top of the EIS. This gauge differs for
engine start and running conditions. Values between 200 and 1200 degrees Celsius (°C) are shown at engine
start; values change to 200 to 800° C once the engine has stabilized. A red triangle is displayed during engine
start as an aide to not exceed maximum starting temperatures. This is available in both normal and reversionary
modes.
Figure 3-3 ITT Gauge
ITT During Engine Start
ITT After Engine Start
TORQUE
The Torque Gauge displays engine workload in foot-pounds and is located beneath the ITT gauge. The values
range from 0 FT-LB to 1600 FT-LB If the torque exceeds the value indicated by the red tick mark, a warning
condition occurs.
Figure 3-4 Torque Gauge