Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 3-45
190-00716-01 Revision 4
3.29 Non-Garmin TCAS II Traffic System Option Configuration
Follow this procedure to enable a non-Garmin TCAS II traffic system function for the G1000 system if
required. Do not accomplish the GTX33/33D configuration procedure per Section 3.13.
NOTE
The G1000 can only be configured for TIS or
TCAS II but not both.
Performing this procedure will automatically disable the TIS function.
Coordinate this configuration with Section 7.14 “Non-Garmin Traffic System
(TCAS II) Functional Check”.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “System
Upload” page on PFD1 using the small FMS knob.
2. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate the small
FMS knob to highlight “King Air – Airframe Options” and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight “King Air - TCAS II System Option”. Press ENT key
on PFD1.
4. Verify the “King Air - TCAS II System Option” is displayed in the “Item” window. Press
“LOAD” softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
• Green “PASS” in the Configuration column for each item loaded.
• “Upload Complete………….COMPLETE” in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.