Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 3-27
190-00716-01 Revision 4
3.13 GTX 33/33D Configuration
Do not perform this step if the TCAS II System Option was loaded per Section 3.29. Follow the
procedures outlined in this section to load the necessary software and configuration files to enable the
GTX33/33D transponders. Coordinate the GTX 33/33D configuration with Section 7.5 “GTX 33( ) or
GTX 3000 Transponder”.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “System
Upload” page using the PFD1 small FMS knob.
2. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate the small
FMS knob to highlight “King Air – Garmin Options” and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight “King Air - GTX 33ES”. Press ENT key on PFD1.
4. Verify “King Air - GTX 33ES” is displayed in the “Item” window. Press “LOAD” softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
• Green “PASS” in the Configuration and Software columns for each item loaded
• “Upload Complete………….COMPLETE” in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.