Instruction Manual

Page 3-10 G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 4 190-00716-01
3.7.4 Configuration Mode Navigation
Using the FMS knob as described in Section 3.1.2, a user can navigate through different pages and page
groups in the Configuration Mode. For complete description and breakdown of each page, refer to the
G1000 System Maintenance Manual listed in Table 1-3.
System Page Group
1. System Status 5. System Upload 9. System Data Path Configuration
2. Time Configuration 6. Diagnostics Terminal 10. System Setup
3. Lighting Configuration 7. OEM Diagnostics 11. Manifest Configuration
4. System Audio 8. System Configuration 12. Maintenance Log
System Page Group (Aircraft equipped with GDU v13.06 or later)
1. System Status 6. Aircraft Configuration 11. System Data Path Configuration
2. Time Configuration 7. File Manager 12. System Setup
3. Lighting Configuration 8. Diagnostics Terminal 13. Manifest Configuration
4. System Audio 9. OEM Diagnostics 14. Maintenance Log
5. System Upload 10. System Configuration
GDU Page Group
1. Serial Configuration 5. Ethernet Test 9. Airframe Configuration
2. CDU Status Page 6. Video Test 10. TAWS Configuration
3. Key Test
4. Diagnostics
7. Alert Configuration
8. DAT Configuration
GIA Page Group
1. Serial Configuration 3. GIA I/O Configuration 5. GIA Status Page
2. GIA RS-485 Configuration 4. GIA COM Setup 6. GIA CAN Configuration
GSD Page Group *
1. GSD ARINC 429 Configuration 3. GSD I/O Configuration
2. GSD RS-485 Configuration 4. GSD Status Page
GEA Page Group
1. Engine Configuration 2. GEA Status Page 3. GEA Configuration
GTX Page Group *
1. Serial Configuration 2. Transponder Configuration
GTX Page Group (Aircraft equipped with GTX 3000)
1. Transponder Airframe Config 2. Transponder Wiring Config
GRS Page Group
1. Inputs Configuration 2. GRS / GMU Calibration
ADC Page Group
1. ADC Configuration 2. GDC Configuration
GFC Page Group
1. GFC Configuration 2. GFC Status
GMA Page (GMA Configuration)