Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 6-19
190-00716-01 Revision 4
6.29 GIA Cooling Fans
Removal:
1. Gain access into the nose avionics equipment bay.
2. Disconnect the cooling fan hoses from the cooling fan. Take necessary precautions to prevent
any foreign debris from entering the fan hoses during maintenance.
3. Disconnect the electrical connector of the cooling fan.
4. Use a Phillips screwdriver to remove the attachment screws (and duct if installed) from the
cooling fan.
5. Remove the cooling fan.
VIEW OF LEFT SIDE NOSE AVIONICS BAY
(NOT ALL ITEMS SHOWN FOR CLARITY)
COOLING FAN HOSE (TYP)
COOLING FAN
NOSE WHEEL WELL HOUSING
Figure 6-6, GIA Cooling Fan Installation
Configuration applicable to MDL 005-00629-00 Rev. 6 or previous FAA-approved revision