Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 5-49
190-00716-01 Revision 4
5.9.2 Database Alerts
Failure Message Cause Solution
MFD1 DB ERR – MFD1 aviation
database error exists.
The MFD or specified PFD has
encountered an error in the
Jeppesen aviation database.
• Reload aviation database into
the display.
• Contact Garmin Technical
Support for assistance.
PFD 1 DB ERR – PFD 1 aviation
database error exists.
PFD 2 DB ERR – PFD 2 aviation
database error exists.
MFD1 DB ERR – MFD1 terrain
database error exists.
The MFD has encountered an
error in the terrain database.
• Confirm supplemental data card is
inserted fully.
• Reload the database or replace the
supplemental datacard.
• Contact Garmin product Support
for further assistance if needed.
PFD 1 DB ERR – PFD 1 terrain
database error exists.
The specified PFD has
encountered an error in the terrain
database.
PFD 2 DB ERR – PFD 2 terrain
database error exists.
MFD1 DB ERR – MFD1 obstacle
database error exists.
The MFD has encountered an
error in the obstacle database.
• Confirm supplemental data card is
inserted fully.
• Reload the database or replace the
supplemental datacard.
• Contact Garmin product Support
for further assistance if needed.
PFD 1 DB ERR – PFD 1 obstacle
database error exists.
The specified PFD has
encountered an error in the
obstacle database.
PFD 2 DB ERR – PFD 2 obstacle
database error exists.
MFD1 DB ERR – MFD1 airport
terrain database error exists.
The MFD has encountered an
error in the airport terrain
database.
• Confirm supplemental data card is
inserted fully.
• Reload the database or replace the
supplemental datacard.
• Contact Garmin product Support
for further assistance if needed.
PFD 1 DB ERR – PFD 1 airport
terrain database error exists.
The specified PFD has
encountered an error in the airport
terrain database.
PFD 2 DB ERR – PFD 2 airport
terrain database error exists.
DB MISMATCH – Aviation
database version mismatch. Xtalk
is off.
The system has found the
Jeppesen aviation database
cycles in the PFDs and/or MFD do
not match.
• Load current aviation database
versions to all displays.
DB MISMATCH – Aviation
database type mismatch. Xtalk is
off.
The system has found the
Jeppesen aviation database types
in the PFDs and/or MFD do not
match (i.e., different regions:
Americas, International, Atlantic,
etc)
• Load same type aviation database
to all displays.