Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 4-29
190-00716-01 Revision 4
27. Turn the heading knob to set the heading bug to the left of center. Hold the control yoke centered for
approximately 10 seconds. Verify that the amber ←AIL annunciator is displayed on both PFD 1 and
PFD 2.
28. Disengage the autopilot and clear all modes.
29. Ensure the aircraft is on the ground and the nose wheel is approximately straight.
30. Engage the yaw damper and apply firm load on the right rudder pedal for approximately 20 seconds.
31. Verify that the amber ←RUD annunciator is displayed on both PFD 1 and PFD 2.
32. Apply firm load on the left rudder pedal for approximately 20 seconds.
33. Verify that the amber RUD→ annunciator is displayed on both PFD 1 and PFD 2.
34. Disengage autopilot.
35. The Trim Annunciator Check is complete.