Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 3-65
190-00716-01 Revision 4
3.47 BLR Winglet Option (model 300 only)
Follow this procedure only if BLR Aerospace STC SA01615SE for 300/300LW series winglets is
installed on the aircraft. This option changes the airspeed indicator marking for air minimum control
speed (Vmca) to 95 KIAS.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “System
Upload” page using the PFD1 small FMS knob.
2. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate the small
FMS knob to highlight “King Air – Options” and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight “King Air - BLR winglet STC (model 300 only)”. Press
ENT key on PFD1.
4. Verify “King Air - BLR winglet STC (model 300 only)” is displayed in the “Item” window.
Press “LOAD” softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
• Green “PASS” in the Configuration column for each item loaded.
• “Upload Complete………….COMPLETE” in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.