Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 3-63
190-00716-01 Revision 4
3.45.2 System Software Version 0985.07 and Subsequent
1. With PFD1 in configuration mode, select the AIRCRAFT CONFIGURATION page on PFD1.
2. Activate the cursor to select the “AIRCRAFT REGISTRATION” field and enter the aircraft’s
tail number.
3. Rotate the large FMS knob to select the “ICAO ADDRESS” and enter the aircraft’s 24 bit ICAO
address.
4. If applicable, rotate the large FMS knob to select the “IATA AIRLINE DESIGNATOR” field
and enter the airline’s 2 digit airline designator code.
5. Rotate the large FMS knob to select the “VFR CODE” field and enter the desired code that will
become active when the VFR key on the GDU is pressed.
6. Press the “SET GTX1” softkey and acknowledge the PFD1 prompt by pressing the ENT key.
7. Press the “SET GTX2” softkey and acknowledge the PFD1 prompt by pressing the ENT key.
8. Press the “SET GTS” softkey and acknowledge the PFD1 prompt by pressing the ENT key.
9. After completing transponder configuration, deactivate the cursor.