Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-01 Rev. A
70
Additional Features
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
9) Press the ENT Key. REGISTER will now be highlighted.
10) Press the ENT Key. System registration is complete when ‘REGISTERED’ is
displayed in the STATUS field.
Disable/Enable Iridium Transceiver
Iridium telephone and data communications may be turned on or off by performing
these simple steps.
Disable/Enable Telephone and Low Speed Data Services:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select the AUX-REPORTS STATUS or AUX-WI-FI
SETUP Page.
3) If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page is
now displayed.
4) Press the MENU Key. The Page Menu window is now displayed.
5) Turn the FMS Knob to select ‘Disable Iridium Transmission’ in the menu list.
6) Press the ENT Key. The Iridium transceiver is now disabled.
7) To enable the Iridium transceiver, repeat steps 1 through 4, then select
‘Enable Iridium Transceiver’.
Telephone Communication
The pilot or copilot can place and answer calls on the Iridium satellite network
as well as to or from the telephone handset in the cabin. Calls can also be answered
or made from the cabin phone, however, only actions initiated from the cockpit
phone will be discussed here. See the cabin handset user guide for more information.
Control and monitoring of telephone functions are accomplished through the AUX-
TELEPHONE Page.
Viewing the Telephone Page
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select the AUX - TELEPHONE or AUX - TEXT
MESSAGING Page.
3) If necessary, select the TEL Softkey to display the AUX-TELEPHONE Page.