Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-01 Rev. A 29
Flight Planning
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
REMOVING A USER-DEFINED HOLD INSERTED IN THE ACTIVE FLIGHT PLAN
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active
Flight Plan Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the HOLD waypoint.
3) Press the CLR Key. A ‘Remove Holding Pattern?’ confirmation window is
displayed.
4) Select ‘OK’ and press the ENT Key. The holding pattern is removed from
the active flight plan. Select ‘CANCEL’ and press the ENT Key to cancel the
removal of the holding pattern.
REMOVING A USER-DEFINED HOLD AT AN OFF-ROUTE DIRECT-TO
1) Press a Direct To Key to display the DIRECT TO Window (PFD or MFD).
2) Press the MENU Key to display the PAGE MENU with the cursor on the
‘Cancel Direct-To NAV’ selection.
3) Press the ENT Key. The holding pattern is removed.
INVERT AN ACTIVE FLIGHT PLAN
1) Press the FPL Key to display the active flight plan.
2) Press the MENU Key to display the Page Menu.
3) Turn the large FMS Knob to highlight ‘Invert Flight Plan’.
4) Press the ENT Key. The original flight plan remains intact in its flight plan
catalog storage location.
5) With ‘OK’ highlighted, press the ENT Key to invert the flight plan.
REMOVE A DEPARTURE, ARRIVAL, APPROACH, OR AIRWAY FROM A FLIGHT
PLAN
1) Press the FPL Key on the Control Unit to display the active flight plan. Press
the FMS Knob to activate the cursor.
Or: