Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-01 Rev. A 3
Flight Instruments
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
2) Turn the small FMS Knob to display the UP/DOWN window. Turn the FMS
Knob to select ‘UP’ or ‘DOWN’, then press the ENT Key. ‘START?’ is now
highlighted.
3) Press the ENT Key to START, STOP, or RESET the timer (if the timer is
counting DOWN, it will start counting UP after reaching zero). Press the
CLR Key or the TMR/REF Softkey to remove the window.
CONFIGURE VSPEED BUGS INDIVIDUALLY
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the desired Vspeed.
3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when a
speed has been changed from a default value, an asterisk appears next to
the speed).
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF
field
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
TURN VSPEED BUGS ON OR OFF BY CATEGORY
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight the desired option.
4) Press the ENT Key. Press the TMR/REF Softkey to remove the window.
SET BAROMETRIC/RADAR ALTIMETER MINIMUM DESCENT ALTITUDE
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the OFF/BARO/RAD ALT field to the
right of ‘MINIMUMS’.
3) Turn the small FMS Knob clockwise to select BARO or RAD ALT.
4) Press the ENT Key.
5) Use the small FMS Knob to enter the desired altitude.
6) Press the ENT Key.
7) To remove the window, press the CLR Key or the TMR/REF Softkey.