Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-01 Rev. A
110
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Message Comments
GIA1 SERVICE – GIA1 needs
service. Return the unit for repair.
The GIA1 and/or GIA2 self-test has detected
a problem in the unit. The system should be
serviced.
GIA2 SERVICE – GIA2 needs
service. Return the unit for repair.
HW MISMATCH – GIA hardware
mismatch. GIA1 communication
halted.
A GIA mismatch has been detected, where only
one is SBAS capable.
HW MISMATCH – GIA hardware
mismatch. GIA2 communication
halted.
GIA1 MANIFEST – GIA1 software
mismatch, communication halted.
The GIA1 and/or GIA 2 has incorrect software
installed. The system should be serviced.
GIA2 MANIFEST – GIA2 software
mismatch, communication halted.
GFC MANIFEST – GFC software
mismatch, communication halted.
Incorrect servo software is installed, or gain
settings are incorrect.
COM1 MANIFEST – COM1 software
mismatch, communication halted.
COM1 and/or COM2 software mismatch. The
G1000 system should be serviced.
COM2 MANIFEST – COM2 software
mismatch, communication halted.
NAV1 MANIFEST – NAV1 software
mismatch, communication halted.
NAV1 and/or NAV2 software mismatch. The
G1000 system should be serviced.
NAV2 MANIFEST – NAV2 software
mismatch, communication halted.
COM1 CONFIG – COM1 config
error. Config service req’d.
COM1 and/or COM2 configuration settings do
not match backup configuration memory. The
G1000 system should be serviced.
COM2 CONFIG – COM2 config
error. Config service req’d.
COM1 TEMP – COM1 over temp.
Reducing transmitter power.
The system has detected an over temperature
condition in COM1 and/or COM2. The
transmitter is operating at reduced power. If the
problem persists, the system should be serviced.
COM2 TEMP – COM2 over temp.
Reducing transmitter power.