Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-01 Rev. A 107
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
Message Comments
MFD1 DB ERR – MFD1 Safe Taxi
database error exists.
The MFD and/or PFD detected a failure in the
Safe Taxi database. Ensure that the data card is
properly inserted. Replace data card. If problem
persists, the system should be serviced.
PFD1 DB ERR – PFD1 Safe Taxi
database error exists.
PFD2 DB ERR – PFD2 Safe Taxi
database error exists.
MFD1 DB ERR – MFD1 Chartview
database error exists.
The MFD and/or PFDs detected a failure in the
ChartView database (optional feature). Ensure that
the data card is properly inserted. Replace data card.
If problem persists, the system should be serviced.
MFD1 DB ERR – MFD1 FliteCharts
database error exists.
The MFD and/or PFDs detected a failure in the
FliteCharts database (optional feature). Ensure that
the data card is properly inserted. Replace data card.
If problem persists, the system should be serviced.
MFD1 DB ERR – MFD1 Airport
Directory database error exists.
The MFD detected a failure in the Airport Directory
database. Ensure that the data card is properly
inserted. Replace data card. If problem persists,
the system should be serviced.
DB MISMATCH – Navigation
database mismatch. Xtalk is off.
The PFDs and MFD have different navigation
database versions or regions installed. Crossfill
is off. Check the AUX-SYSTEM STATUS Page
to determine versions or regions. Also, check
the AUX-SYSTEM STATUS Page for a database
synchronization function not completed. After
synchronization is complete, power must be
turned off, then on.
DB MISMATCH – Standby
Navigation database mismatch.
The PFDs and MFD have different standby
navigation database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to
determine versions or regions. Also, check the
AUX-SYSTEM STATUS Page for a database
synchronization function not completed. After
synchronization is complete, power must be
turned off, then on.