Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-01 Rev. A
86
Additional Features
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Select an Available Channel within the Selected Category
1) While on the XM Radio Page, select the CHNL Softkey.
2) Select the CH + Softkey to move down through the list in the Channel Box,
or move up the list with the CH – Softkey.
Or :
Press the FMS Knob to highlight the channel list and turn the large FMS
Knob to scroll through the channels.
3) With the desired channel highlighted, press the ENT Key.
Entering a Channel Directly
1) While on the XM Radio Page, select the CHNL Softkey.
2) Select the DIR CH Softkey. The channel number in the Active Channel Box
is highlighted.
3) Select the numbered softkeys located on the bottom of the display to
directly select the desired channel number.
4) Press the ENT Key to activate the selected channel.
Assigning Channel Presets
Up to 15 channels from any category can be assigned a preset number.
1) On the XM Radio Page, with the desired channel active, select the
PRESETS Softkey to access the first five preset channels (PS1 - PS5).
2) Select the MORE Softkey to access the next five channels (PS6 – PS10),
and again to access the last five channels (PS11 – PS15). Selecting the
MORE Softkey repeatedly cycles through the preset channels.
3) Select the SET Softkey.
4) Select any one of the (PS1 - PS15) softkeys to assign a number to the
active channel.
Adjusting Volume
Radio volume is controlled at each passenger station.