Manualshelf

System Maintenance Manual

ManualsBrandsGarmin ManualsFlight DecksGarmin MDL Rev 7, SA01456Wi_D
61626364656667686970
Page 3-40 G1000/GFC700 System Maintenance Manual – C90A/C90GT/C90GTi King Air
Revision F 190-00682-01
3.9.4.7 ADF – 60 Option Configuration
1. While in configuration mode on PFD 1 and with the loader card in the top slot of PFD 1, use the
large FMS knob to select the SYSTEM group. Select “SYSTEM UPLOAD” page using the
small FMS knob.
2. Activate cursor and rotate small knob to display drop down menu. Verify “C90-Options” is
highlighted and press ENT on PFD 1.
3. Verify cursor drops down to the file box. Rotate the small FMS knob to view the list of available
C90 options.
4. Use the FMS small knob to select “King Air C90 – ADF-60 Option”. Press ENT on PFD 1.
5. Verify the “King Air C90 – ADF-60 Option” configuration file is displayed in the “File”
window. Press “LOAD” on PFD 1.
6. Monitor load progress. Verify software load completes without errors as indicated by the
following:
a. Green “PASS” in Configuration column for GIA2, GMA PIL, and GMA COPIL.
b. “Upload Complete………….COMPLETE” in the summary box.
7. Select ENT on PFD 1 to acknowledge upload complete. Deactivate cursor.
3.9.4.8 RAD ALT (Configuration Placeholder)
NOTE
This STC does not approve the installation or configuration of a radio altimeter.
3.9.4.9 DME 42 Option Configuration
1. While in configuration mode on PFD 1 and with the loader card in the top slot of PFD 1, use the
large FMS knob to select the SYSTEM group. Select “SYSTEM UPLOAD” page using the
small FMS knob.
2. Activate cursor and rotate small knob to display drop down menu. Verify “C90-Options” is
highlighted and press ENT on PFD 1.
3. Verify cursor drops down to the file box. Rotate the small FMS knob to view the list of available
C90 options.
4. Use the FMS small knob to select “King Air C90 – DME-42 Option”. Press ENT on PFD 1.
5. Verify the “King Air C90 – DME-42 Option” configuration file is displayed in the “File”
window. Press “LOAD” on PFD 1.
6. Monitor load progress. Verify software load completes without errors as indicated by the
following:
a. Green “PASS” in Configuration column for GIA1, GMA PIL, and GMA COPIL.