Pilot's Guide

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
190-00663-02 Rev. B86
FLIGHT INSTRUMENTS
Enabling/Disabling the Radar Altimeter Test Mode:
1) Turn the large FMS Knob to select the AUX page group on the MFD.
2) Turn the small FMS Knob to select the AUX - System Status Page.
3) Press the RA TEST Softkey to enable or disable the test.
Or:
1) Press the MENU Key.
2) Turn the small FMS Knob to choose ‘Enable RA Test Mode’ or ‘Disable RA Test Mode’ (choice dependent on
current state).
3) Press the ENT Key.
Whentestmodeisactive,‘RATEST’isannunciatedabovetheRAboxand50feetwillbedisplayedinthe
RAbox.
Figure 2-55 Radar Altimeter with Test Annunciation