Pilot's Guide

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
190-00663-02 Rev. B58
FLIGHT INSTRUMENTS
Theyellow symbolicaircrafton theAttitudeIndicatorchangesappearance basedon selectionof AFCS
ightdirectorCommandBarformat(seetheAFCSSectionfordetails).BothPFDsshowthesameCommand
BarformatandAircraftSymbol.TheCommandBarformat(single-cueorcross-pointer)maybeselectedfrom
theAUX-SystemSetupPageFigure2-10.
Changing Command Bar format:
1) Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2) If necessary, press the SETUP 1 Softkey to display the System Setup 1 Page.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight ‘Format Active’ in the ‘Flight Director’ box.
5) Turn the small FMS Knob to highlight the desired format.
’SNGL CUE’ to display Command Bars as a single cue (Aircraft Symbol in figure 2-10).
Or:
’X-POINTER’ to display Command Bars as a cross pointer (Aircraft Symbol in Figure 2-10).
Figure 2-10 Flight Director Format
(AUX - System Setup Page)
Single-cue
Cross-pointer