Pilot's Guide

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi 190-00663-02 Rev. B494
ADDITIONAL FEATURES
WhenachartisnotavailablebyselectingtheSHW CHRTSoftkeyorselectingaPageMenuOption,charts
maybeobtainedforotherairportsfromtheWPTPagesorFlightPlanPages.
Ifachartisavailableforthedestinationairport,ortheairportselectedintheactiveightplan,thechart
appearsonthescreen.Whennoightplanisactive,orwhennotyingtoadirect-todestination,selectingthe
SHW CHRTSoftkeydisplaysthechartforthenearestairport,ifavailable.
ThechartshownisoneassociatedwiththeWPT–AirportInformationpage.Usuallythisistheairportrunway
diagram.Wherenorunwaydiagramexists,butTakeOffMinimumsorAlternateMinimumsareavailable,that
pageappears.IfAirportInformationpagesareunavailable,theApproachChartfortheairportisshown.
Selecting a chart:
1) While viewing the Navigation Map Page, Flight Plan Page, or Nearest Airports Page, select the SHW CHRT
Softkey. The airport diagram or approach chart is displayed on the Airport Information Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to select either the Airport Identifier Box or the Approach Box. (Select the APR Softkey
if the Approach Box is not currently shown).
4) Turn the small and large FMS Knob to enter the desired airport identifier.
5) Press the ENT Key to complete the airport selection.
6) Turn the large FMS Knob to select the Approach Box.
7) Turn the small FMS Knob to show the approach chart selection choices.
8) Turn either FMS Knob to scroll through the available charts.
9) Press the ENT Key to complete the chart selection.
Figure 8-53 Approach Information Page, Chart Selection
Select Desired
Approach Chart
from Menu
Chart Not
To Scale
Pan Chart
With the
Joystick
Aircraft Not
Shown Icon